Yamaha mLAN8E User Manual download pdf (Page 6)

English

Names and Functions

Rear Panel

SERIAL I/O jack

This jack is used to connect the mLAN8E directly to a personal computer via a serial cable. Use this

jack to connect the mLAN8E and the computer when you are using the mLAN Patchbay and mLAN

Mixer on Windows. This is not used to input or output MIDI and audio signals. Refer to page 7 for

more information on the connections.

mLAN (IEEE1394) jacks

These jacks are used to connect mLAN devices or IEEE1394-compatible devices via IEEE1394 stan-

dard (6-pin) cables. Each jack has an LED in the upper left corner to indicate the following statuses.

green : The mLAN8E or connected device is a “leaf” node.

off : Not connected.

red : If the cable is disconnected, the sound will be interrupted on a connected device or other

device.

RT/ERR LED

This LED indicates the following statuses.

green : The mLAN8E is a “root.”

orange : An error has occurred. (IEEE1394 bus-related)

red : An error has occurred. (Other errors)

off : Status other than above.

Refer to “LED Messages” on page 21 for information on the error indication.

ACTIVE LED

This LED indicates the following statuses.

blue : The relay function is active.

off : The relay function is disabled.

Since the mLAN8E does not function as a bus relay when the power is turned off, the active

LED also indicates whether the power to the unit is on (blue) or off.

3 12

NOTE

mLAN8E-(E).book Page 6 Wednesday, October 18, 2000 3:31 PM

1 2 3 4 5 6 7 8 9 10 11 ... 62 63

No comments

Yamaha mLAN8E User Manual Page 6