Yamaha CX-A5000 Owner's Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 163
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
CONFIGURATIONS Configuring various functions (Setup menu) En 111
VPS
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and
surround speakers. When VPS is enabled, the unit creates front VPS when no front
presence speakers are connected, and creates rear VPS when front presence
speakers are connected but no rear presence speakers (p.56).
Settings
Depending on the installation height of the surround speakers, VPS may not be effective. In this case, set
“VPS” to “Off”.
DAC Digital Filter
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have
favorite sounds.
Settings
Video
Configures the video output settings.
Analog to Analog Conversion
Enables/disables the video conversion (p.148) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).
Settings
This function works only when “Monitor Out Assign” (p.118) is set to “Main” (default) and “HDMI OUT2
Assign” (p.118) is set to “Main” (default) or “Zone4”.
The unit does not convert 480-line and 576-line video signals interchangeably.
Only 480i/576i-resolution video signals can be output from the S VIDEO and VIDEO jacks (p.148).
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments).
Settings
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
Off Disables Virtual Presence Speaker (VPS).
On (default) Enables Virtual Presence Speaker (VPS).
Sharp Roll-off Type
Removes out-of-band noises by the filter with steep attenuation
characteristics.
It has a tendency to produce clear sounds.
Slow Roll-off Type
Removes out-of-band noises by the filter with gentle attenuation
characteristics.
It has a tendency to produce soft sounds.
Short Latency Type
(default)
Reduces the audio delay caused by the DAC internal digital filter.
It has a tendency to produce responsive and rhythmical sounds.
Off Disables the video conversion between the analog video jacks.
On (default)
Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks
only.
Direct (default) Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 162 163

Comments to this Manuals

No comments