Yamaha MCR-140 Owner's Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
4 En
Follow the procedure below to connect the speakers and indoor FM antenna to this unit.
Do not connect the power cable of this unit until all cable connections are completed.
Be sure to connect the left channel (L), right channel (R), “+”(red) “–”(black) properly. If the connections are faulty, no sound will be
heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lacks bass.
Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/
or the speakers.
Use the supplied speakers only. Using different speakers may cause the sound to differ from the intended design.
There is a chance that placing speakers too close to a CRT-based (Braun tube) TV set might impair picture color. Should this happen,
move the speakers away from the TV set.
CONNECTION
Basic connection
CAUTION
Notes
To the wall outlet
Indoor FM antenna
The antenna should be stretched out.
If radio reception is poor, change the height,
direction, or placement of the antenna.
If you use an outdoor antenna instead of the
supplied FM antenna, reception will be better.
Notes
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 135 136

Comments to this Manuals

No comments