Yamaha CRX-D430 Owner's Manual download pdf (Page 8)

Basic operation of this unit

6 En y The circled numbers and alphabets correspond to the ones on the attached sheet.

Press

STANDBY/ON (or

STANDBY/ON) to

turn on this unit.

Press it again to set this unit to the standby mode.

• You can select whether to display the clock (ECO OFF mode)

or not (ECO ON mode) when this unit is in the standby mode.

Press and hold

TIME MODE during standby mode until

“ECO OFF” or “ECO ON” appears.

• To charge your iPod while this unit is in the standby mode,

select “ECO OFF”.

• The memory back-up circuit prevents the clock setting from

being lost even if this unit is in the standby mode. However, the

clock setting will be lost if the power cable is disconnected from

the AC wall outlet or if the power supply is cut off for more than

four minutes.

• In the standby mode, this unit consumes a small amount of

power.

Press one of the input selector buttons (

)

repeatedly (or press

INPUT) to select the

input source from CD, iPod, TUNER (FM/AM/

DAB), and AUX.

• Press

BAND (or

BAND) to select FM, AM, or

DAB.

• For details on CD, iPod, and tuner operations, refer to

pages 8, 10, 12, and 14.

• When you select AUX, this unit outputs sound played

back on the component which is connected to the AUX

IN jacks. While AUX is selected as the input source,

this unit does not output signals at the AUX OUT

jacks.

Press

VOLUME + (or rotate

VOLUME

clockwise) to increase the volume level and

press

VOLUME – (or rotate it counter-

clockwise) to decrease it.

■ Muting the sound

Press

MUTE.

To restore audio output to the previous volume level, press

it again or press

VOLUME +/–.

1 Press

FUNCTION (or

FUNCTION).

2 Press

/ repeatedly (or rotate the

multi jog dial (

)) to select the setting from

“Bass” (low frequency), “Treble” (high

frequency), and “Balance” (speaker balance),

and then press

ENTER (or push the multi

jog dial (

)).

3 Press

/ repeatedly (or rotate the

multi jog dial (

)) to adjust the setting and

then press

ENTER (or push the

multi jog dial (

)).

The setting ranges are as follows:

Bass ..................... –10 dB to +10 dB

Treble................... –10 dB to +10 dB

Balance................ L +6 to R +6

These settings have no effect on the audio signals output at the

AUX OUT jacks and the DIGITAL OPTICAL OUT jack.

Connect the headphone plug to the

PHONES

jack.

While headphones are connected, the sound from the speakers

and subwoofer is cut off.

Press

DIMMER repeatedly.

You can select the brightness level from bright, mid dim,

and dim.

Basic operation of this unit

Turning on the power

Selecting an input source

Adjusting the volume level

Adjusting sounds

Note

Listening through the headphones

Changing the brightness of the

display

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Yamaha CRX-D430 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Home audio sets Yamaha CRX-D430