Yamaha MDR-10 Specifications download pdf (Page 37)

device, input “0000.”

A Passkey may be called a “Passcode,” a “PIN code,” a “PIN

number,” or a “Password.”

4. Make the BLUETOOTH connection from the BLUETOOTH

device.

Depending on the BLUETOOTH device, the headset may be

connected with the device automatically as soon as they are

paired.

Tip

To delete all pairing information, see “What can I do to solve a

problem?”

Notes

For details, refer to the manual supplied with the BLUETOOTH

device.

When pairing with a BLUETOOTH device that cannot display a list

of detected devices or that has no display, you may pair the device

by setting both the headset and the BLUETOOTH device to

pairing mode. At this time, if passkey is set besides “0000” on the

BLUETOOTH device, pairing cannot be done with the headset.

Once BLUETOOTH devices are paired, there is no need for

pairing again, except in the following cases:

Pairing information is deleted after repair, etc.

The headset is paired with 9 or more devices. The headset can

be paired with up to 8 devices; if a new device is paired after 8

devices have been paired, the device whose latest connection

time is the oldest among the 8 paired devices is replaced by the

new one.

When recognition of the headset by the device to be connected

is deleted.

The headset is initialized. All pairing information is deleted.

Connecting with a paired BLUETOOTH device

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 76 77

No comments

Yamaha MDR-10 Specifications Page 37