Yamaha WaveRunner GP800R Operator's Manual download pdf (Page 114)

5-8

EJU00604a

Submerged watercraft

If the watercraft is submerged or flooded

with water, follow the procedure below and

consult a Yamaha dealer as soon as possi-

ble. Failure to do so may result in serious

engine damage!

1. Beach the watercraft and remove the

stern drain plugs to drain the water from

the engine compartment.

2. Turn the fuel cock knob to “OFF.”

3. Remove the spark plugs and dry them

with a cloth.

4. Without reinstalling the spark plugs,

crank the engine until all the water in the

cylinders has been drained.

5. Install the stern drain plugs and the

spark plugs.

6. Turn the fuel cock to “ON.”

7. Launch the watercraft into the water, and

then run the engine for at least

10 minutes. If the engine will not start,

repeat steps above.

8. Turn the engine off. Turn the fuel cock to

“OFF.”

9. Remove the silencer caps and spray a

rust inhibitor such as Yamaha Stor-Rite

Engine Fogging Oil into the carburetor

while cranking the engine.

10. Have the watercraft inspected by a

Yamaha dealer as soon as possible.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 122 123

No comments

Yamaha WaveRunner GP800R Operator's Manual Page 114