Yamaha VZ200C Owner's Manual download pdf (Page 78)

4-15

4) Reinstall the filter element. Make sure

the O-ring is in position in the cup.

Insert the cup and O-ring into the fil-

ter housing 6. Lift up and hold the

spring to screw the ring nut onto the

filter housing until the ring is lightly

seated.

5) Tighten the ring nut approximately an

additional 1/4 turn until the ring nut is

tight. Align one of the four larger ring

nut tabs with the spring and release it

to lock the ring nut in position.

6) Run the engine and check the filter

and lines for leaks.

EMU09912

INSPECTING IDLING SPEED

8 Do not touch or remove electrical parts

when starting or during operation.

8 Keep hands, hair and clothes away

from flywheel and other rotating parts

while engine is running.

This procedure must be performed while

the outboard motor is in the water. A

flushing attachment or test tank can also

be used.

68J-9-15-4 2/28/03 9:27 Page 16

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

No comments

Yamaha VZ200C Owner's Manual Page 78