Yamaha DVD-C920 Manual download pdf (Page 35)

INTRODUCTIOIN

PREPARATIONS

PLAYBACK

SETUP MENU

APPENDIX

English

■ Returning setup menu to the factory-setting

While playback is stopped, press and hold d (PAUSE), and then DISC SKIP and PLAYXCHANGE on the front panel until

‘Initialized’ appears on the video monitor. All settings on the setup menu return to the factory settings.

TROUBLESHOOTING

Sound distorted. Virtual surround effect is emphasized too

much.

Turn virtual surround mode off. 23

This unit is being subjected to vibrations or

impacts.

Relocate the unit. —

The disc is dirty. Clean the disc. 3

Sound ‘hums’. Incorrect cable connections. Securely connect the audio cables. If the

problem persists, the cables may be defective.

Noise from a nearby

tuner.

The tuner is too close to the unit. Place the tuner and the unit farther apart. —

Noise from inside of

the unit.

The disc maybe warped. Replace the disc. —

The batteries are weak. Replace all batteries with new ones. 7

Sound ‘skips’.

The remote control

does not work.

Direct sunlight or lighting (from an inverter

type of fluorescent lamp, etc.) is striking the

remote control sensor of this unit.

Relocate the unit.

No sound when playing

a disc encoded with

DTS.

Incorrect setting(s) at the audio section of

‘Setup menu’ on this unit or at ‘input mode’

on your amplifier.

Select proper settings. 26, 27

No sound from some

speakers.

With some DVD-Audio, output channels are

specified by the disc.

—

Incorrect ‘Speaker settings’. (when 6CH

DISCRETE outputs are connected to your

amplifier)

Change the settings to suit your speaker

system.

Audio output form this unit becomes two

channels when the virtual surround feature is

on.

Turn virtual surround mode off. 23

Audio track and/or

subtitle language is not

the selected one.

The disc does not contain the language you

have selected.

—

No subtitles. The disc does not have subtitles. —

Subtitle is turned off. Show subtitles by pressing SUBTITLE or

using on-screen menu.

Angle cannot be

changed.

The disc or the scene being played does not

support multi-angle.

—

The password for

setting parental level

has been forgotten.

Clear all settings on the setup menu. See

‘Returning setup menu to the factory-setting’

below this table.

—

PROBLEM POSSIBLE CAUSE WHAT TO DO

Refer to

Page

108-C920(E)30-32 12/24/1, 11:56 AM31

1 2 ... 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Yamaha DVD-C920 Manual Page 35

Comments to this Manuals

Related products and manuals for DVD players Yamaha DVD-C920