Yamaha RX21 User Manual download pdf (Page 8)

SETTING UP

Please read the PRECAUTIONS section of this manual before setting up your RX21.

The CONNECTIONS diagram which folds out at the front of this manual shows you how to make the simple

connections necessary to set up your RX21. Use the PA-1 power supply, or any similar power supply to convert

the AC voltage to the voltage required to power the RX21 (9 to 12 V).

A brief output pulse appears at the RX21 outputs when the power is initially turned on. To prevent this from possibly

damaging your speaker system, make sure the master volume control of your sound system, or the volume of the

mixer channel to which the RX21 is connected, is set to minimum before the RX21 is turned on. Better yet, turn

on the RX21 first, then your sound system.

The RX21 has an LCD (Liquid Crystal Display) panel that keeps you informed of what is happening at any moment

(for example, which pattern is playing, or what editing operation you are carrying out). When you turn on the

RX21, the LCD shows “YAMAHA RX21” for about a second, then switches to the “SELECT PTN 00”, the basic

select pattern mode display which prompts you to select any pattern and then play it back. (The LCD also displays

Error Messages to indicate any faults or operating errors: see the ERROR MESSAGES section of this manual).

Without any further operations, the RX21 is now ready for you to play.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 61 62

No comments

Yamaha RX21 User Manual Page 8