Yamaha DTX RS700 User Manual download pdf (Page 4)

2 RS500/RS700 Owner’s Manual

1. Remove the rack from its box and stand it up with the drum trigger module clamp and the left leg positioned on the right

as shown in Figure 1.

2. With the rack standing up, loosen the bolts q located on the left and rotate the left leg towards you until it is positioned

as shown in Figure 1 Top view.

• The bolts q can be found on the rear of the clamp on the left pillar.

3. Loosen the bolts w located on the right in Figure 2 and rotate the right leg clockwise from the left until it comes fully

around as shown in Figure 2 Top view.

• The bolts w can be found on the rear of the clamp on the right pillar.

4. Tighten the bolts loosened in Steps 2 and 3 above.

Setting up RS500

Bolts q

[Figure 1]

Right leg

Left leg

Left pillar

Drum trigger

module clamp

[Figure 1 Top view]

Left leg

Right leg

Left pillar

Right pillar

[Figure 2]

Bolts w

Left leg

Right leg

Right pillar

Left pillar

Drum trigger

module clamp

[Figure 2 Top view]

Left leg

Right leg

Left pillar

Right pillar

CAUTION

• The rack may topple over and cause

injury if the left and right legs are

opened any wider than shown in the

figure below. You should not, there-

fore, exceed the dimensions indicated.

rs500_700_en_1224.fm Page 2 Friday, December 24, 2010 9:15 AM

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Yamaha DTX RS700 User Manual Page 4

Comments to this Manuals

Related products and manuals for Dryers Yamaha DTX RS700