Yamaha QL Editor Owner's Manual download pdf (Page 24)

QL Editor Owner’s Manual

DCA window

In this window you can view and edit the parameters of DCA (Digital-Controlled Amplifier) groups 1–16.

You can access this window in the following ways.

• From the [Windows] menu, choose [Overview] and then choose “DCA”

• Use the bank select keys in the Master window to turn on the [DCA] button

1 CUE

This button cue-monitors all channels that are assigned to the DCA group.

If the Channel Select/Sends On Fader checkbox in the System Setup dia-

log box is not checked, the [CUE] button will be hidden in the screen.

2 ON

If you turn this button off, no signal will be output from the channels assigned to the DCA

group. If you turn this button on, that status will be cancelled.

3 DCA fader

This fader adjusts the level of the DCA group.

The current fader value is shown in the numeric box immediately below the fader.

You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key of

your computer keyboard and clicking the fader knob, or set it to the nominal value

(0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the fader

knob. If the fader is at nominal level, the green indicator at the right of the fader will light.

If a DCA group is set to Recall Safe, the R character at the lower right of the fader is dis-

played in green.

4 DCA number

This is the number of the DCA group.

5 DCA group name

This is a text box that displays the DCA group name. You can also edit the DCA group name

in this text box. You can right-click (<control> key + click) the text box to select a channel

color.

6 Level Meter

This level meter indicates the post-meter of DCA.

Click the level meter area to switch between the recall-safe indicator and

the level meter.

NOTE

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 96 97

No comments

Yamaha QL Editor Owner's Manual Page 24