PM5D Editor Owner’s Manual
9
In this window you can view and edit the mix parameters of ST IN channels 1–4. You can use the [View] menu to
choose the parameters that will be displayed in the window.
A Input patch
Selects the input source that will be assigned to the ST IN channel. The input sources
that can be assigned are the same as for an input channel (➥ p.6).
B +48V
Switches on/off the phantom power (+48V) of the internal head amp (PM5D-RH
model only) or of the external head amp (AD824, AD8HR) patched to the ST IN chan-
nel.
C HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp (PM5D-RH
model only) or of the external head amp (AD824, AD8HR) patched to the ST IN chan-
nel.
D HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
E Ø (Phase)
Inverts the phase of the signal after AD conversion.
F INSERT
Enables/disables the insert-out that is patched in the PM5D’s INSERT PATCH screen
(INPUT PATCH function). (The L/R settings are linked.)
G DIRECT
Enables/disables the direct out that is patched in the PM5D’s DIRECT OUT PATCH
screen (INPUT PATCH function). (The L/R settings are linked.)
ST IN window
5
6
7
1
2
3
4
Comments to this Manuals