Yamaha YDP-151 Owner's Manual download pdf (Page 21)

YDP-151/YDP-323 Selecting & Playing Voices

ENGLISH

Layering Two Voices (Dual mode)

You can layer two voices and play them simultaneously to create a thicker and more supple sound.

1. Engage Dual mode.

While holding down the

[PIANO/VOICE]

button, press two keys in the range of C1

through A1 simultaneously to select the two desired voices. Alternatively, while holding

down the

[PIANO/VOICE]

button, press and hold down one key, then press another.

Refer to “Selecting & Playing Voices” on page 18 for information on the voices

that are assigned to the keys.

The voice assigned to the lower key will be designated as Voice 1, and the voice

assigned to the higher key will be designated as Voice 2.

You can make the following settings for Voices 1 and 2 in Dual mode:

Setting the Octave

You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-

pendently. Depending on which voices you combine in Dual mode, the combi-

nation may sound better if one of the voices is shifted up or down an octave.

While holding down the [PIANO/VOICE] button, press one of the C5–F5 keys.

Setting the Balance

You can adjust the volume balance between two voices. For example, you can set

one voice as the main voice with a louder setting, and make the other voice softer.

While holding down the [PIANO/VOICE] button, press one of the F



5–F



6 keys.

A setting of “0” produces an equal balance between the two Dual mode voices.

Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and set-

tings above “0” increases the volume of Voice 1 in relation to Voice 2.

2. Exit Dual mode and return to normal play mode.

While holding down the [PIANO/VOICE] button, press one of the C1–A1 keys.

Procedure

You cannot assign the same

voice to Voice 1 and Voice 2

simultaneously in Dual mode.

Reverb in Dual Mode

The reverb type assigned to

Voice 1 will take priority. (If the

reverb assigned to Voice 1 is set

to OFF, the reverb assigned to

Voice 2 will be in effect.) The

reverb depth setting (

page 20

)

will be applied only to Voice 1.

C1 A1The lowest key

C5 F5

The highest key

For setting

the octave. (C5–F5)

C5 key: –1 (Voice 1), C



5 key: 0 (Voice 1), D5 key: +1(Voice 1),



5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2)



F 6



-5

-6 -4 -2

+1 +3 +6

-3 -1 0 +2 +4 +5

The highest key

For setting the balance. (F



5–F



1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

Comments to this Manuals

No comments

Yamaha YDP-151 Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha YDP-151