Yamaha PLG150-VL Owner's Manual download pdf (Page 22)

Selecting DX Voices

(Modular Synthesis Plug-in System)

When the PLG150-DX is installed to a CS6x Control Synthesizer, the DX voices can be selected in

the same way as the internal voices of the synthesizer.

The example displays used in the following explanations are all taken from the CS6x.

Enabling and Selecting DX Voices

1 Press the VOICE button.

2 Press the appropriate PLG button (PLG1 or PLG2, depending on which

slot the PLG150-DX board has been installed to), then press the appropri-

ate BANK button and PROGRAM button to select the desired Plug-in

voice.

To select a different bank, simultaneously hold down the appropriate PLG button and turn knob C (or

press the DEC/INC buttons) to select the desired bank.

The bank is expressed in two numbers: MSB and LSB.

If a selected bank is not available, the bank letter indication in the display (A - H) will not change.

For a list of the available banks and their MSB/LSB values, refer to the “DX-XG Voice Map” at

the back of this manual.

VCE Play) PLG1:001(A01)[--:Plig-InVce]

EQLow-G EQMid-G EQHi-G ------- -------

VCE Play) P1-B:001(A01)[--:MM-Pno 1 ]

BANK= 083/065



1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

No comments

Yamaha PLG150-VL Owner's Manual Page 22