Yamaha DGT7A Specifications Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
38
Timer-Controlled
Playback
By using the Auto Start function and a clock
timer, you can set the Disklavier GranTouch to
automatically begin playback at a specified time.
1
Set the Auto Start function as
described in “Setting Auto Start”
on the previous page.
2
Turn off the Control Unit and then
connect the Disklavier GranTouch
power cable to a clock timer as
shown below.
Also refer to the clock timer operating
manual for details.
Note: Be sure to turn off the Control Unit
before disconnecting the power cable
from the AC outlet. Otherwise, volume
and balance settings may be altered to
inappropriate settings when the
Disklavier GranTouch begins Auto
Start.
3
Insert a song disk into the disk
drive, as necessary.
If you want to play back songs from the
Memory Disk, make sure there is no floppy
disk inserted in the disk drive.
4
Set the clock timer as required.
5
Press [STANDBY / ON] to turn on
the Control Unit.
The Disklavier GranTouch will
automatically begin playback at the
specified time.
Note: The [STANDBY / ON] button must be
depressed in order for the Disklavier
GranTouch to begin playback at the
specified time.
You can also replace the song disk after you set
Timer-Controller Playback.
Volume and balance settings can be adjusted after
playback begins, but the adjustments will not be
saved when the Disklavier GranTouch is turned
off by the timer. In order to save the adjusted
settings, manually turn the Control Unit off then
on again.
Depending on the capabilities of your clock timer,
you can set the Disklavier GranTouch to come on
once, twice, or at regular intervals during the day.
Plug-in
Timer
Power Cable
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

Comments to this Manuals

No comments