User preferences
62
English
11.
User preferences
In this section you will learn how to set your user preferences on the DVD recorder.
The symbols have the following meanings:
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Press
SYSTEM-MENU
on the remote control. The menu bar appears.
3
Select “ ” using
t
or
u
and confirm with
w
.
4
Select the appropriate function with
w
or
v
and confirm with
u
.
5
Select the appropriate line using
w
or
v
and confirm with
u
.
6
Select the appropriate function using
w
or
v
or the setting with
t
or
u
.
7
Confirm the new setting by pressing
ENTER/OK
.
8
To close the menu item, press
t
.
You can choose the following features in this menu:
“
TV shape
”
The picture signal from your DVD Recorder can be set to match your TV screen.
“
4:3 letterbox
”
: for a “wide-screen” picture with black bars at the top and bottom
“
4:3 panscan
”: for a full-height picture with the sides trimmed.
“
16:9
” : for a wide-screen TV set (screen edge ratio 16:9)
“
Black level shift
”
Adapts the colour dynamics for NTSC playback
“
Video shift
”
Use this feature to adjust the position of the picture on your TV left or right using
t
,
u
to suit your TV set.
“
RGB attenuation
”
Adjusts the brightness for recording when connected with RGB.
“
Video output
”
Use this setting when scart terminals are in use.
•) For RGB signals through the scart cable, select “
RGB + CVBS
”.
•) For S-video signals through the scart cable, select “
S-Video
”.
•) For CVBS signals through the scart cable, select “
CVBS only
”.
Picture setting
Sound setting
Language setting
Additional settings
Disc settings
Recording settings
Installation
Picture settings
n
TV shape 16:9
Black level shift Off
Video shift
RGB attenuation
Video output RGB + CVBS
Picutre
DRX-2_G.book Page 62 Tuesday, October 14, 2003 5:02 PM
Comments to this Manuals