search

Yamaha TSX-100 Service Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 1
2
TSX-100
TSX-100
WALL
OUTLET
EQUIPMENT
UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
WARNING: CHEMICAL CONTENT NOTICE!
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY
REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
1. Critical Components Information
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
● Meter impedance should be equivalent to 1500 ohms shunted
by 0.15µF.
● Leakage current must not exceed 0.5mA.
● Be sure to test for leakage with the AC plug in both polarities.
本機に搭載されているすべての基板およびハンダ付けによる接合
部は無鉛ハンダでハンダ付けされています。
無鉛ハンダにはいくつかの種類がありますが、修理時には下記の
ような無鉛ハンダの使用を推奨します。
・ Sn+Ag+Cu（錫+銀+銅）
・ Sn+Cu（錫+銅）
・ Sn+Zn+Bi（錫+亜鉛+ビスマス）
注意：
無鉛ハンダの融点温度は通常の鉛入りハンダに比べ30∼40℃
程度高くなっていますので、それぞれのハンダに合ったハンダ
ごてをご使用ください。
All of the P.C.B.s installed in this unit and solder joints are
soldered using the lead free solder.
Among some types of lead free solder currently available,
it is recommended to use one of the following types for the
repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder is
about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
About lead free solder / 無鉛ハンダについて
■ TO SERVICE PERSONNEL
Page view 1
1 2 3 4 5 6 7 ... 39 40

Comments to this Manuals

No comments
Related products and manuals for CD players Yamaha TSX-100
CD players Yamaha GX-500RDS Owner's Manual   (46 pages)
CD players Yamaha CD-S2000 Service Manual   (59 pages)
CD players Yamaha MDP2 User Manual   (25 pages)
CD players Yamaha CDX-750 Owner's Manual          (20 pages)
CD players Yamaha 505 Service Manual  (92 pages)
CD players Yamaha 480 Owner's Manual   (20 pages)
CD players Yamaha CDX-660 Owner's Manual          (19 pages)
CD players Yamaha CDX-530 Owner's Manual          (23 pages)
CD players Yamaha CDX-710U Owner's Manual          (20 pages)
CD players Yamaha CC-50 Owner's Manual    (48 pages)
CD players Yamaha GX-90VCD Specifications   (71 pages)
CD players Yamaha GX-700VCD Owner's Manual   (52 pages)
CD players Yamaha CDX-550 Owner's Manual          (20 pages)
CD players Yamaha CDC-91 Owner's Manual   (15 pages)
CD players Yamaha CRW2200SX Setup Guide       (156 pages)
CD players Yamaha CDR-D651 Owner's Manual   (33 pages)
CD players Yamaha CDC-835 Owner's Manual   (24 pages)
CD players Yamaha GX-505VCD Specifications   (47 pages)
CD players Yamaha VCD-102K Owner's Manual   (23 pages)
CD players Yamaha CDC-635 Owner's Manual   (15 pages)
  • Avlite Harrington-hoists-and-cranes Fuel Doctor RKI Instruments Breadman
  • Sanyo DVD players Fidelio Docking speakers Samsung Supplementary music equipment Epson Power cables Sony HDD/SSD cases
  • Panasonic TY-EW3D10E Ridgid R84015 VAL Avionics NAV 2000 Trim-tex Crown Molding Whirlpool GMA 6422-IX
  • LG LAS454B User Manual HP Slate All-in-One - 17-l010 User Manual Behringer XENYX CONTROL1USB Quick Start Guide Sony SLT-A58K Handbook BenQ DV2050 User Manual