Yamaha DV-C6860 - DVD Changer Owner's Manual download pdf (Page 27)

23

English

Setup Menu

Setting the analog output

Set the analog output to match the

playback capability of this unit.

1 In “AUDIO SETUP PAGE”, press 3 / 4 to

highlight [ANALOG OUTPUT], and then

press 2.

STEREO

Select this to change the channel output to

stereo, which only delivers sound from the

two front speakers.

LT/RT

Select this if this unit is connected to a

Dolby Prologic decoder.

2 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

Setting the digital output

The [DIGITAL AUDIO] options are:

“DIGITAL OUTPUT” and “LPCM

OUTPUT”.

1 In “AUDIO SETUP PAGE”, press 3

/ 4 to

highlight [DIGITAL AUDIO], and then

press 2.

2 Press 3

/ 4 to highlight an option.

3 Press 2 to enter a submenu.

DIGITAL OUTPUT

Set the digital output according to your

optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital

audio output jack to a multi-channel

decoder/receiver.

PCM ONLY

Select this only if your receiver is not

capable of decoding multi-channel audio

signals.

Note:

If your receiver cannot decode DTS, no sound

output from DTS signals in any mode.

LPCM OUTPUT

Select this if you have connected this unit

to a PCM-compatible receiver via a digital

terminal, such as the coaxial terminal. In

this case, you may need to adjust “LPCM

OUTPUT”.

Discs are recorded at a certain sampling

rate. The higher the sampling rate, the

better the sound quality.

48KHz

Select this to play back discs recorded at

the sampling rate of 48 kHz. All 96 kHz

PCM data streams (if available) are

converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at

the sampling rate of 96 kHz. If the 96 kHz

disc is copy protected, the digital output is

automatically converted to the sampling

rate of 48 kHz.

4 Press 3

/ 4 to select a setting, and then

press ENTER/OK to confirm your

selection.

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Comments to this Manuals

No comments