Yamaha CDX-396 Owner's Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
English
E-19
m Random sequential tape-programming
The unit will automatically program tracks in random sequential order for recording to tape.
1 Follow steps 1 – 3 on page 16.
2 Press RANDOM.
* The unit will automatically program tracks at random for
both side A and side B considering the tape’s total time.
3 Begin recording on the tape deck, and then press
on this unit.
4 The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording,
and then press or on this unit.
Notes
Because programmed data changes every time RANDOM is
pressed, the unrecorded space at the end of each side of the
tape also varies accordingly.
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a tape that is longer than
the actual playing time.
In step 2, you can check the program data for side A and side
B.
CDX-596
CDX-496, CDX-396
1
Shows the number of tracks programmed on each side
right after the programming is finished. It is then replaced
by the number of the first programmed track on side A.
2 Shows the programmed track numbers on each side.
3 Shows the total time of programmed tracks on each side.
4 Shows the side of the tape.
Up to 40 tracks can be programmed. A pause inserted between
side A and B is counted as one track.
CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 3 and 4, press
SYNCHRO and then press on this unit’s remote control.
Recording automatically begins. (For details, refer to page 21.)
RANDOM
REPEAT
4
2
3, 4
RANDOM
1
3
2 4
PROGRAM
2
12
468
A
TOTAL
PROGRAM
A
13
2
4
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments