Yamaha RX-V670 Owner's Manual Page 1

IMPORTANT!Please record the serial number of thisunit in the space below.Model:Serial No.:The serial number is located on the rearof the unit.Retain t

101Set to “∞”.2 Select the front speakers to be used.* If you use two front speaker systems, press both the Aand B switches.3Set to “0”.4Set to “0”.5S

11For detailed information on the remote control transmitter, refer to “REMOTE CONTROL TRANSMITTER” on page 23.Select the center mode according to you

12Adjust the BALANCE control so that the effect soundoutput level of the left front speaker and the right frontspeaker are the same.Make the sound out

13OPERATIONSIf desired, adjust the BASS, TREBLE, BALANCEcontrols, etc. (refer to page 15) and use the digitalsound field processor. (Refer to page 18

14Select the source to be recorded.* To dub from tape to tape, refer to the “Notes” shownbelow.* When selecting LD/TV, TUNER, CD or PHONO, makesure th

15Adjust the balance of the output volume to the left and rightspeakers to compensate for sound imbalance caused byspeaker location or listening room

16TUNING OPERATIONSNormally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) ispossible.

17PRESET TUNINGThis unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you cansel

18Description of Each Sound Field ProgramPROGRAM FEATUREThis program reproduces sources encoded with the Dolby Surround.PRO LOGICThe employment of the

19Notes on Operation of Sound Field Programs●In the CONCERT VIDEO, MONO MOVIE, ROCK CONCERTand CONCERT HALL modes, no sound is heard from thecenter sp

21 Read Instructions – All the safety and operatinginstructions should be read before the unit is operated.2 Retain Instructions – The safety and ope

20Adjustment of DELAY TIMEYou can adjust the time difference between the beginning ofthe source sound and the beginning of the effect sound withthe DE

21Adjustment of the REAR LEVELAdjustment of the FRONT EFFECT LEVELIf desired, you can adjust the effect sound output level of thefront speakers with t

22SETTING THE SLEEP TIMERIf you use the SLEEP timer of this unit, you can set this unit to be turned off automatically. When you are going to sleep w

23For Control of This UnitREMOTE CONTROL TRANSMITTERThe provided remote control transmitter is designed to control this unit and other YAMAHA componen

24For Other Component ControlIdentify the remote control transmitter keys with your component’s keys. If these keys are identical, their function will

25REMOTE CONTROL “LEARNING” FUNCTIONThe keys on this remote control transmitter can be programmed to “learn” key-functions from other remote control t

26Press and hold the CLEAR button using the point of amechanical pencil, etc.Press and hold the key where the learned function tobe deleted is until t

27AmplifierFMAMOthersRemote control transmitterTROUBLESHOOTINGIf the unit fails to operate normally, check the following points to determine whether t

28AUDIO SECTIONMinimum RMS Output Power per ChannelFront L,R8 ohms, 20 Hz to 20 kHz, 0.03% THD...70W+70W6 ohms, 20 Hz to 20 kHz, 0.05% THD[U.S.A.

29BLOCK DIAGRAM

31. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!This product, when installed as indicated in theinstructions contained in this manual, meets FCCrequire

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,

4SUPPLIED ACCESSORIESAfter unpacking, check that the following parts are contained.●Remote Control Transmitter●Batteries (size AA, LR6, UM-3)●Indoor F

5PROFILE OF THIS UNITYou are the proud owner of this Yamaha stereo receiver –an extremely sophisticated audio component. The Digital Sound FieldProce

6SPEAKER SETUP FOR THIS UNITSPEAKERS TO BE USEDThis unit is designed to provide the best sound-field quality with a 5 speaker configuration. The spea

7CONNECTIONSBefore attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any othercompone

8Connect the SPEAKERS terminals to your speakers with wireof the proper gauge, cut to be as short as possible. If theconnections are faulty, no sound

9ANTENNA CONNECTIONS●Each antenna should be connected to the designated terminals correctly, referring to the following figure.●Both AM and FM indoor