Yamaha KX-300 Manual download pdf (Page 13)

PAMODE

CONTROL CHANGE

CONTROL

CHANGE

MIDI CHANNEL

The readouts will display the MIDI channel numbers

for banks A and B.

If you press the controller while pressing bank switch

A or B, the selected bank readout will start blinking.

Now you may enter the new channel number for that

bank. When you release the switch, the readout will

return to its usual display.

LOAD

Press and hold down the controller. Use the bank B

program select switches to select the code memory

you want to load. (recall)

A OCTAVE UP

B OCTAVE UP

A OCTAVE DOWN

B OCTAVE DOWN

Transposes bank A or B up or down one octave.

CHANNEL INCREMENT 1

0D CHANNEL DECREMENT 1

PARAMETER CHANGE

0E CHANNEL INCREMENT 2

0F CHANNEL DECREMENT 2

Moves the MIDI channel up or down 1 or 2. As with

other controller code assignments, this can be specified

for either/or A and B. The new MIDI channel number

will be displayed for about 0.5 seconds. If the number

goes beyond 16 or 1, it will come around to 1 or 16.

PARAMETER

CHANGE

16 DATA ENTRY

This corresponds to the data entry slider on the DX

series synthesizers.

26 INCREMENT

27 DECREMENT

These correspond to the +1 -1 switches on the DX

series synthesizers.

30 SONG SELECT

The upper readout will display SS. Now, select song

0-9 by pressing bank B program select switches 1-10.

31 MIDI CLOCK

When this controller code has been assigned to Wheel

1-Foot Controller 2, the KX88 will send MIDI tempo

clock data at a tempo of = 40-240, according to the

position of the controller.

Note about controller codes.

The KX88 will send any type of MIDI data. However, some

MIDI devices may not accept certain messages.

Consult the MIDI data list for that device.

Use this to define controller codes 40-FF as MIDI control

change messages.

When you press this switch, the upper readout will show

CC . Enter the controller code number you want to define,

and the readout will show 00. Now enter the MIDI control

number (00-7F). Next, enter the data type. The data type

is significant only if this controller code is assigned to

Foot Switch 1 or 2. Regardless of the data type, TS1, 2

and MS1-5 will not send anything when turned off.

Data Type Switch On Switch off

0 Transmits 7F Transmits 00

Transmits 7F Nothing

Transmits 00 Nothing

Use this to define controller codes 40-FF as SYSTEM

EXCLUSIVE: PARAMETER CHANGE messages. When

you press this switch, the upper readout will show PC.

Enter the controller code you want to define. The upper

readout will shown LM (Limit) and the lower readout

will shown OF (Off). This allows you to select an upper

limit for the data of the parameter change. Use the bank

B program select switches 1-6 to select an upper limit of

3, 7, 15, 31, 63 or 99. If you press bank B switches 7-16,

the limit will be off. (127 max)

After you have specified the limit, the upper readout will

show G. Enter the group number (00-1F) of the parameter

you want to change. Next, the upper readout will show SG,

so enter the su/jointfilesconvert/286656/bgroup (0-3). Next, the upper readout will

show P, so enter the parameter number (00-FF).

NOTE: System Exclusive messages include an ID number

which is different for each manufacturer. Con-

troller codes you define using PARAMETER

CHANGE will affect only Yamaha equipment. To

define System Exclusive messages for other

manufacturer’s products, use the Universal Para-

meter function.

-11-

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Comments to this Manuals

No comments

Yamaha KX-300 Manual Page 13

Comments to this Manuals

Related products and manuals for Cassette players Yamaha KX-300