Yamaha CVP-98 Specifications download pdf (Page 47)

CVP-98/96/600

Selecting the Effect Type

Select the Effect Type by pressing the left/right LCD buttons in the

EFFECT pop-up display.

You can also select the Effect Type by using the EFFECT TYPE ▼ ▲

buttons, or by pressing EFFECT TYPE (to highlight the parameter) and

using the data dial or [–/+] buttons.

To reset the value to the basic setting, simultaneously press EFFECT

TYPE ▼ ▲ or simultaneously press the [–/+] buttons.

The Reverb Types in the list below can also be selected from the ef-

fect display.

• Range: (Refer to the Effect Type list.)

• Basic setting: Differs depending on

the voice.

• Backup of last settings: OFF

• When other effect type or OFF mes-

sages are received via MIDI,

XG EF-

FECT

is indicated in the display.

• The word “delay” refers to the echo-

like effect of delayed repeats of the

sound.

● Effect Type List

When Using the DUAL or SPLIT Func-

tion:

• When the effects of both voices are set

to ON, and the types are different, the

effect for the second voice of the Dual

mode or the left voice of the Split mode

may be temporarily cancelled in some

cases. After this point, if you subse-

quently increase the Effect Depth

value of the second voice of Dual

mode or of the left range voice of

SPLIT mode, the effects will be applied

to both voices.

Voice Effects

STAGE1

STAGE2 Reverb for solo instruments.

STAGE3

HALL1

HALL2 Concert hall reverb.

HALL3

ROOM1

ROOM2 Small room reverb.

ROOM3

Reverb Types (selectable from the Effect display)

Effect Types

DELAY L,R Initial delay for each stereo channel,

and two separate feedback delays.

ECHO Stereo delay.

CROSS DELAY Complex effect that sends the de-

layed repeats “bouncing” between

the left and right channels.

TREMOLO Rich Tremolo effect with both volume

and pitch modulation.

ROTARY FAST Rotary speaker simulation.

ROTARY SLOW Rotary speaker simulation.

PHASER Pronounced, metallic modulation with

periodic phase change.

WAH Repeating filter sweep “wah” effect.

CHORUS1

Conventional chorus program with

CHORUS2

rich, warm chorusing.

CHORUS3

CELESTE Three-phase LFO for richer, more

pronounced chorusing.

FLANGER Pronounced three-phase modulation

with slight metallic sound.

SYMPHONIC Exceptionally rich & deep chorusing.

AUTO PAN Several panning effects that auto-

matically shift the sound position (left,

right).

DELAY L,C,R Three independent delays, for the

left, right and center stereo positions.

• If the Reverb Type in Effect is selected

and both [REVERB] and [EFFECT] are

set to on, both reverb effects will be

applied.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 163 164

Comments to this Manuals

No comments

Yamaha CVP-98 Specifications Page 47

Comments to this Manuals

Related products and manuals for Cassette players Yamaha CVP-98