Yamaha AX-590 Owner's Manual

Natural Sound Stereo Integrated Amplifier100W + 100W (8Ω) RMS Output Power, 0.015% THD, 20–20,000 Hz <AX-590>85W + 85W (8Ω) RMS Output Power, 0

10Setting the SUBSONIC FILTER switchWhen you listen with headphonesConnect the headphones to the PHONES jack. When listeningwith headphones privately

11REMOTE CONTROL TRANSMITTERThe remote control transmitter provided with this unit is designed to control all the most commonly used functions of the

12NOTES ABOUT THE REMOTE CONTROL TRANSMITTERBattery installationBattery replacementIf you find that the remote control transmitter must be usedcloser

13SYMPTOMThe unit fails to turn on when the POWERswitch is pressed.No sound.The sound suddenly goes off.Only one side speaker outputs the sound.There

14SPECIFICATIONSMinimum RMS Output Power per Channel<AX-590>8 ohms, 20 Hz to 20 kHz, 0.015% THD...10

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,

1 Read Instructions – All the safety and operatinginstructions should be read before the unit is operated.2 Retain Instructions – The safety and opera

FCC INFORMATION3YAMAHA and the Electronic Industries Association’sConsumer Electronics Group want you to get the most out ofyour equipment by playing

4CONNECTIONS●Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any othercompon

5AX-490: Refer to “ABOUT THE OTHER REAR PANEL PARTS” on page 6.PHONOCDTAPE 1TAPEPBRECOUTA OR B:6ΩMIN./SPEAKERA B:l2ΩMIN./SPEAKERSPEAKERSABMAINSTUNE

6Connect the SPEAKERS terminals to your speakers with wireof the proper gauge, cut as short as possible. If theconnections are faulty, no sound will

71, 6OPERATIONSTO PLAY A SOURCE1Set to the “∞” position.2Turn the power on.3Select a desired input source.*If you select turntable as an input source

8TO RECORD A SOURCE TO TAPE (OR DUB FROM A TAPE TO ANOTHER)1Select the source to be recorded.2 Play the source.3 Confirm the source by selecting it wi

9Adjusting the BASS and TREBLEcontrolsAdjusting the BALANCE control Selecting the SPEAKER systemAdjust the balance of the output volume to the left an