Yamaha RX-V385 Owner's Manual download pdf (Page 69)

Setting the crossover frequency of the low-frequency

components

Sets the lower limit of the low-frequency components that can be output from a

speaker whose size is set to “Small”. A frequency sound lower than the specified value

will be produced from the subwoofer or front speakers.

Setup menu

“

Speaker” > “Configuration” > “Crossover”

Settings

40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz

Note

If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and

crossover frequency to maximum.

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch

the subwoofer phase.

Setup menu

“Speaker” > “Configuration” > “Subwoofer Phase”

Settings

Normal Does not reverse the subwoofer phase.

Reverse Reverses the subwoofer phase.

Note

This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”

menu, see the following:

▪ “Setting the use of a subwoofer” (p.67)

Setting the use of Extra Bass

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced

bass sounds, regardless of the size of the front speakers and the presence or

absence of the subwoofer.

Setup menu

“Speaker” > “Configuration” > “Extra Bass”

Settings

Off Disables Extra Bass.

On Enables Extra Bass.

Note

You can also use BASS on the remote control to enable/disable Extra Bass.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 111 112

No comments

Yamaha RX-V385 Owner's Manual Page 69