Yamaha BRX-750 User Manual download pdf (Page 44)

41 En

English

ADDITIONAL

INFORMATION

ADDITIONAL INFORMATION

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

Yamaha dealer or service center.

TROUBLESHOOTING

General

Problem Cause Remedy Page

No power. Press on the front panel to turn on the power.

This unit fails to turn

on or enters standby

mode soon after the

power is turned on.

This unit does not

operate properly.

The power cable is not connected or the

plug is not completely inserted.

Connect the power cable firmly.

This unit has been exposed to a strong

external electric shock (such as lightning

or strong static electricity).

Set this unit to standby mode, disconnect the power

cable, plug it back in after 30 seconds and then use it

normally.

—

This unit needs to be restarted. Press and hold on the front panel for around 5

seconds to restart this unit. To completely restart,

unplug the power cable from the AC outlet for 5 to

10 seconds, plug the power cable to the AC outlet

again, and then turn on this unit.

The disc cannot be

played back.

The Initial Wizard is not set. Set the Initial Wizard when you turn this unit on for

the first time after purchase or upgrade.

No sound. No appropriate input source has been

selected.

Select an appropriate input source with INPUT on

the front panel (or the Input select buttons on the

remote control).

Speaker connections are not secure. Secure the connections.

The mute function is on. Cancel the mute function.

The volume is turned down. Turn up the volume.

Signals this unit cannot reproduce are

being input from a source component,

such as a CD-ROM.

Play a source whose signals can be reproduced by

this unit.

[HDMI Control] is set to [Off]. When connecting ARC (Audio Return Channel)

supported TV and this unit using an HDMI cable

only, set [HDMI Control] to [On].

No sound from the

speakers or

headphones.

[HDMI] for audio output in SETUP menu

is not set to [Off].

Set [HDMI] to [Off].

No picture. Incorrect cable connections. Make sure that the cables are connected correctly.

Make sure that the connected TV is set to the correct

input.

Connect this unit to the TV with VIDEO jack using

the supplied video pin cable.

– If picture is still not displayed with this unit

connected to the VIDEO jack, press and hold

and on the front panel simultaneously

for around 5 seconds when no disc is inserted and

playback is stopped to switch NTSC/PAL.

TV system is set incorrectly. Press and hold and on the front panel

simultaneously for around 5 seconds when no disc is

inserted and playback is stopped to switch NTSC/

PAL. Set resolution properly again when connecting

through HDMI (p. 36).

—

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 168 169

Comments to this Manuals

No comments

Yamaha BRX-750 User Manual Page 44

Comments to this Manuals

Related products and manuals for Blu-Ray players Yamaha BRX-750