Yamaha BD-S673 Owner's Manual download pdf (Page 43)

38 En

ADDITIONAL INFORMATION

Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed

below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest

authorized Yamaha dealer or service center.

■ Power

■ Basic operation

■ Disc playback

Troubleshooting

Problem Possible causes and solutions

No power. – Connect the AC power cable properly.

– Press p on the front panel to turn on the power.

The Player power is turned off. – The power will be automatically turned off after 30 continuous minutes of inactivity (no

playback).

Problem Possible causes and solutions

The remote control does not work. – Use the remote control within its operating range. (p. 9)

– Replace the batteries. (p. 9)

– Check the ID settings for the main unit and the remote control. The remote control ID

on the main unit may be changed after the main unit is reset. In this case, verify the

remote control ID on the main unit, and set it again if needed. (p. 9)

Buttons do not work. – Press and hold p on the front panel for more than 5 seconds, and release to reset this

Player.

– To completely reset this Player, unplug the power cable from the AC outlet for 10

seconds or more, plug the power cable to the AC outlet again, and then turn on this

Player.

Password is forgotten.

– Press and hold and on the front panel simultaneously when no disc is inserted

and playback is stopped to set all the settings including Security settings (p. 31) of this

Player to their default settings. After the power is turned off automatically, press p to

turn on the power again.

Problem Possible causes and solutions

The Player cannot play a disc. – Take out the disc and clean it. (p. 4)

– Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (p. 4)

– Use a disc supported by the Player. (p. 3)

– Remove the disc and then check whether the Player supports the disc or not. (p. 3)

– Check the region code. (p. 3)

– Check whether the disc is defective by trying another disc.

– The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized. (p. 3)

Video stops. – The Player will stop if it senses shock or vibration.

The Player makes a snapping sound

when starting playback or loading a

disc.

– These sounds are not malfunctions of the Player but are normal operating conditions.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 62 63

Comments to this Manuals

No comments

Yamaha BD-S673 Owner's Manual Page 43

Comments to this Manuals

Related products and manuals for Blu-Ray players Yamaha BD-S673