Yamaha BD-A1020 Owner's Manual download pdf (Page 87)

37 En

SETUP menu

English

Settings

Noise Reduction

You can set the Noise Reduction to a level of 0 to 3. 0 is

off, and 3 is the maximum level.

0, 1, 2

, 3

De-interlacing Mode

You can select how to detect the video signal. Set to Auto

for normal use. When horizontal stripping noise appears

on the screen, set this to Film/Video to remove the noise.

Auto

, Film, Video

■ Audio Setting

The default settings are marked with “

”.

Audio Output

Coaxial / Optical

You can select the output mode of COAXIAL jack and

OPTICAL terminal. For more details on output formats,

refer to “About the audio output formats” (p. 38).

HDMI

You can select the output mode of HDMI terminal. For

details on setting items, see “Coaxial / Optical” (p. 37). For

more details on output formats, refer to “About the audio

output formats” (p. 38).

Bitstream

, PCM, Reencode, Off

– To output HD audio (Dolby TrueHD or DTS-HD

Master Audio) from HDMI terminal, set Video Out

Select to Auto or more than 720p (p. 36).

Downsampling

You can select digital audio signal down-sample

frequency. This function is effective for the audio signal

output from the COAXIAL jack/OPTICAL terminal.

DRC

You can set the DRC (Dynamic Range Compression)

(p. 44) to on/off/Auto. When set to Auto, DRC is

automatically turned on for a source with DRC

information in Dolby TrueHD format. DRC makes the

strong sound such as plosive sound lower, and

conversations more audible. It is useful when you watch

movies in the night.

Off, On, Auto

SACD Output

Output Priority

You can select the output priority from HDMI or Analog

for playing back SA-CDs.

– Selecting Analog mutes the HDMI output when SA-

CD is played back. See page 38 for information on

the SA-CD output formats.

SACD Priority

Selects the playing back priority for 2-channel contents or

multi-channel contents, when the disc contains both types

of contents.

Multi-ch

, 2-ch

HDMI Output

You can select audio signal output from HDMI terminal

when SA-CD is played back.

Speaker Setting

2ch Downmix

You can select down mix method to analog 2-ch from

Stereo or Lt/Rt.

Post Process

UpMix

You can multi-channelize the 2-channel audio signal. To

multi-channelize, select DTS NEO:6, then select Cinema

or Music mode.

Off

, DTS NEO:6

■ System Information

Software version and MAC address (p. 45) are displayed.

Bitstream Outputs digital signal without any processing.

Secondary Audio is not output.

PCM Outputs 2-channel PCM.

Reencode

Outputs Bitstream with Secondary Audio.

Off Mutes sound.

Note

48K

The highest sampling rate of digital PCM output is

48 kHz.

96K The highest sampling rate of digital PCM output is

96 kHz.

192K The highest sampling rate of digital PCM output is

192 kHz.

HDMI

The settings for SACD Priority and HDMI Output

are applied.

Analog Always plays back the SA-CD’s high quality 2-

channel area. The signal is fully optimized for analog

2-channel outputs to be best quality.

Note

DSD

Outputs DSD raw signal. When this Player is

connected to DSD compatible AV receiver, this item

is recommended.

PCM Outputs PCM signal decoded by this Player.

Lt/Rt Select this item if this unit is connected to a Dolby

Pro Logic decoder. Sound from rear speakers is

mixed to the 2-ch stereo sound.

Stereo

Changes channel output to stereo, which only

delivers sound from the two front speakers.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 111 112

Comments to this Manuals

No comments

Yamaha BD-A1020 Owner's Manual Page 87

Comments to this Manuals

Related products and manuals for Blu-Ray players Yamaha BD-A1020