Yamaha YHT-594 Owner's Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
2 En
Once you’ve positioned the speakers, you’ll need to cut the 25-
meter (82 ft.) speaker cable to make three cables for
connecting the front/center speaker and two cables for the
surround speakers.
1 Cut the included speaker cable to suitable lengths
for the front/center speaker and surround speakers.
You need five cables.
2 Remove about 10 mm (3/8") of insulation from the
end of each speaker cable.
3 Twist the bare wires tightly.
Notes
Make the speaker cables as short as possible. Do not bundle
or roll up excess cable.
Twist the bare wires tightly so the individual strands are not
splayed.
Be careful not to injure yourself while preparing the speaker
cables.
4 Connect the speaker cables to the front/center
speaker (NS-BR300) and surround speakers
(NS-B285).
Note
Refer to the SPS-90 Owner’s Manual for information on
connecting the surround speakers (NS-B285).
Attaching the speaker stands
Front/center speaker (NS-BR300)
If you place the front/center speaker (NS-BR300) at the base of
your TV, attach the included stands. If you use it without the
stands, affix the included non-skid pads.
Surround speakers (NS-B285)
Refer to the SPS-90 Owner’s Manual for information on
assembling the SPS-90 speaker stands and attaching the
surround speakers (NS-B285).
Connecting the speakers and antennas
1
Preparing the cables and
speakers
Good No Good
10 mm (3/8")
NS-BR300
(front/center speaker)
Non-skid pads
550 mm (21-5/8")
695 mm (27-3/8")
82 mm
(3-1/4")
97 mm
(3-7/8")
Stand
Attaching the stands
On the rear of the front/center speaker (NS-BR300), there
are four screw holes at each end for attaching the stands at
a suitable height and width for your TV.
Note
Make sure the front/center speaker does not obstruct
the remote control sensor on the front of your TV.
Affixing the non-skid pads
Screw for the
NS-BR300 stands
Page view 3
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments