Yamaha RX-V867 Owner's Manual Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 144
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
En 120
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
Changing TV format
Change the color encoding format of OSD to PAL or NTSC
(default), to match the format used by the TV connected via the
HDMI OUT 1-2 or VIDEO (MONITOR OUT) jack.
Removing HDMI video output up-scaling
limits
Removes the up-scaling limitation on video resolution when this
unit and a TV are connected via HDMI jacks.
If a resolution supported by the monitor cannot be detected when
configuring the up-scaling settings, this setting will remove the
output limitation.
Initializing various settings for this unit
Initializes various settings stored in this unit and sets it back to
default.
Select the items to be initialized from the following.
When an option other than CANCEL is selected, the applicable
default settings will be restored when the unit switches to standby
mode.
Firmware update
Update the firmware of this unit. For details on updating the
firmware, refer to information supplied with updates.
When this unit detects the latest firmware over a network, the
message indicating that the firmware is released is displayed in the
System information (
p. 114).
1
Press STRAIGHT repeatedly to select “NETWORK.
2
Press INFO to start update with the selected option.
Firmware version
Check the version of firmware currently installed on this unit.
YES (Default) Video output signals of a resolution not supported by
the TV will not be transmitted.
SKIP This unit ignores the TV’s support capability and
transmits input video signals to the TV.
TVFORMAT-NTSC
MON.CHK-YES
DSP PARAM Initializes all parameters for the sound programs.
VIDEO Resets video conversion settings (resolution/aspect
ratio) in the Setup menu.
NETWORK Resets the settings of network such as IP address or
the account of vTuner.
ALL Resets this unit to default factory settings.
CANCEL (Default) Does not initialize.
INIT- CANCEL
FIRMUPDATE
NETWORK Updates the firmware of this unit via network.
Do not use this feature unless the firmware must be updated.
Be sure to read the information supplied with updates before
updating firmware.
About the latest firmware
When installing the latest firmware, the new functions or fix of
failure may be served.
The latest firmware can be downloaded from our website.
While displaying the ON SCREEN menu or “System” from
Information menu, the information on the latest firmware is
displayed via a network.
PHONES
YPAO MIC
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
INFOZONE
CONTROL
ZONE2
MAIN ZONE
MEMORY
PRESET
FM AM
CATEGORY
STRAIGHT
INFO
VERSIONX.XX
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 143 144

Comments to this Manuals

No comments