Yamaha RX-V657 Owner's Manual download pdf (Page 70)

SET MENU

■ Speaker distance C)SP DISTANCE

Use this feature to manually input the distance of each

speaker and adjust the delay applied to respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

most home situations. Thus, a certain amount of delay

must be applied to the sound from each speaker so that all

sound will arrive at the listening position at the same time.

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting:

U.S.A. and Canada models: feet (ft)

Other models: meters (m)

• Select meters to input speaker distances in meters.

• Select feet to input speaker distances in feet.

Speaker distances

Choices: 0.3 to 24.00 m (1 to 80 ft)

• FRONT L adjusts the distance of the front left speaker.

Initial setting: 3.0 m (10.0 ft)

• FRONT R adjusts the distance of the front right

speaker. Initial setting: 3.0 m (10.0 ft)

• CENTER adjusts the distance of the center speaker.

Initial setting: 3.0 m (10.0 ft)

• SUR. L adjusts the distance of the surround left

speaker. Initial setting: 3.0 m (10.0 ft)

• SUR. R adjusts the distance of the surround right

speaker. Initial setting: 3.0 m (10.0 ft)

• SB L

adjusts the distance of the surround back left

speaker. Initial setting: 2.10 m (7.0 ft)

• SB R

adjusts the distance of the surround back right

speaker. Initial setting: 2.10 m (7.0 ft)

• SWFR adjusts the distance of the subwoofer. Initial

setting: 3.0 m (10.0 ft)

• PRES L adjusts the distance of the presence left

speaker. Initial setting: 3.0 m (10.0 ft)

• PRES R adjusts the distance of the presence right

speaker. Initial setting: 3.0 m (10.0 ft)

Instead of SB L and SB R, SUR. B will be displayed if you

selected only one surround back speaker in SUR. B L/R SP

(page 64).

■ Center graphic equalizer D)EQUALIZER

Use this feature to select the parametric (AUTO PEQ) or

graphic equalizer (CNTR GEQ).

Equalizer EQ TYPE SELECT

Select to change the type of equalizer used by this unit.

Choices: AUTO PEQ, CNTR GEQ, EQ OFF

• Select AUTO PEQ to use the equalizer adjusted in auto

setup.

• Select CNTR GEQ to adjust the built-in 5-band graphic

equalizer so that the tonal quality of the center speaker

matches that of the front left and right speakers.

• Select EQ OFF to cancel equalizing.

Center graphic equalizer CENTER GEQ

When CNTR GEQ is selected, use this feature to output a

test tone and adjust the tonal quality so that it matches that

of the front left speaker.

You can adjust 5 frequency bands:

100Hz, 300Hz, 1kHz, 3kHz, 10kHz

Choices: –6 to +6 dB

Initial setting: 0 dB

• Select ON to output test tones from the front left and

center speakers, and adjust the tonal quality of the

center speaker.

• Select OFF to stop the test tone and output the

currently selected source component.

•Press u / d to select a frequency band.

•Press j / i to adjust the selected frequency band.

. UNIT;;;;;;meters

FRONTL;;;;3.00m

FRONTR;;;;3.00m

CENTER;;;;;3.00m

[]/[]:Up/Down

[<]/[>]:Adjust

C)SP

DISTANCE

.TEST)OFFON

-+

100Hz0dB

300Hz0dB

1kHz0dB

3kHz0dB

10kHz0dB

[]/[]:Up/Down

[<]/[>]:Adjust

D)EQUALIZER

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 105 106

Comments to this Manuals

No comments

Yamaha RX-V657 Owner's Manual Page 70

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V657