Yamaha RX-V371 Owner's Manual download pdf (Page 39)

En 39

SETUP

Configuring the settings specific for each input source (Option menu)

■

Adjusting volume between input sources

Input source: All

Reduces any change in volume when switching between input

sources by correcting volume differences in each input source. You

can adjust this parameter for each input source.

■

Combining HDMI/AV1-2 input source

video and audio

Input source: HDMI1-4, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an external device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an external device with component video output and analog audio

output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-4 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Displaying information on audio/video

signals

Input source: HDMI1-4, AV1-4 J1

Displays information on digital audio and video signals on the

front panel display. You can display the signal information by

pressing jENTER on the menu item and using jCursor B / C.

Audio information

Video information

Volume Trim

Adjustable range -6.0 dB to 0.0 dB to +6.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB steps

Audio In

SL SR

Audio;;;;;;AV1

HDMI1

VOL.

Assignable audio input jacks

Inputs that change the audio source

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical jack for the selected input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial jack for the selected input.

Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect

the external component audio cable to the audio jack

for the selected input.

• For details of settings, refer to “Receiving audio from other input

sources” (☞

p. 16) and “Component connections to analog audio

output devices” (☞

p. 17).

• To return audio inputs to their previous settings, display this item

again, and select the original input jack.

Signal Info

SL SR

DolbyD

FORMAT

VOL .

Menu item

Information

FORMAT Format of audio signals.

CHAN The number of input signal channels (front/surround/

LFE).

For example, if input signal channels are 3 front

channels, 2 surrounds and LFE, “3/2/0.1” is

displayed.

If a channel that cannot be expressed as the above is

input, a total number of channels such as “5.1ch” may

be displayed.

SAMPL The sampling frequency of analog-to-digital

conversion.

B RATE The bit rate of input signal per second.

V IN Format and resolution of video input signal.

V OUT Format and resolution of video output signal.

V.MSG

(appears only

when an error

has occurred)

Error messages about HDMI signals and components.

Error message

HDCP Error HDCP authentication failed.

Device Over The number of connected HDMI

components is over the limit.

• “No Signal” is displayed when no signals are being received,

and “---” is displayed if this unit cannot recognize the incoming

signal.

• The bit rate may vary during playback.

1 : AV5 or AUDIO1-2 are also available when the “Audio Return Channel”

function is on, and the source is used for the TV audio input (TVAudio).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 87 88

Comments to this Manuals

No comments

Yamaha RX-V371 Owner's Manual Page 39

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V371