Yamaha RX-V2065 Owner's Manual download pdf (Page 77)

73 En

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

In the advanced setup menu, you can set basic operations

of this unit, such as on and off of a bi-amp connection, or

initialize user settings.

1 Set this unit to standby.

2 While holding down QSTRAIGHT on the

front panel, press LMAIN ZONE ON/OFF.

Keep holding down QSTRAIGHT until

“ADVANCED SETUP” appears on the front panel

display.

3 Rotate the PPROGRAM selector to select

the parameter you want to change.

The default setting are marked with “*”.

• Set values are placed in XXX of the following parameters on an

actual display screen.

SP IMP. -XXX

Selects output impedance of this unit according to

connected speakers. When you connect 4-ohm

speakers to the FRONT speaker terminals, set “SP

IMP.” to “6ΩMIN.”.

RS232C STBY -X

Selects whether or not to transmit data via the RS-

232C terminal when this unit is in the standby mode.

REMOTE ID -XXX

Sets a remote control ID. When using multiple

Yamaha AV receivers, you can operate them with a

single remote control by setting the receiver IDs to

the same setting.

SR PIN -XXX

Resets Parental lock cord when using SIRIUS

Satellite tuner.

BI AMP - XXX

Switches on and off of bi-amp connection of main

speakers. For bi-amp connection, see page 12.

SCENE IR -XXX

Selects whether or not to transmit the control signals

to an external component connected to the REMOTE

OUT jack on this unit when BD/DVD or CD SCENE

function is selected.

MON.CHK - XXXX

Adds upscaling limitation on output signals to a video

monitor connected to this unit via the HDMI OUT

jack.

INIT-XXXXXXXXX

Initializes various settings stored in this unit. You can

select an initialization method from the following.

DSP PARAM: All parameters of sound field

programs

VIDEO Video conversion settings (resolution/

aspect) in the Setup menu and the GUI

display position

NETWORK Network settings in the Setup menu

ALL All

CANCEL Cancellation of initialization

USB FirmUpdate

NET FirmUpdate

Updates the firmware of this unit. For details on how

to update the firmware, refer to information supplied

with updates.

Notes

• Do not use this feature unless you need to update the firmware.

• Be sure to read information supplied with updates before updating

the firmware.

VERXXX.XXX.XXX

Displays the firmware of this unit.

4 Press OSTRAIGHT repeatedly to change

the selected parameter setting.

To change other settings, repeat steps 3 and 4.

5 Press KMAIN ZONE ON/OFF to set this

unit to standby.

The settings you made are reflected next time you

turn on this unit.

Advanced setup

Choices: 6ΩMIN, 8ΩMIN*

Choices: Y (Yes)*, N (No)

Choices: ID1*, ID2

Choices: RESET, CANCEL*

Choices: ON, OFF*

Choices: ON*, OFF

ADVANCEDSETUP

Choices: YES*, SKIP

Choices: DSP PARAM, VIDEO, NETWORK, ALL,

CANCEL*

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 113 114

Comments to this Manuals

No comments

Yamaha RX-V2065 Owner's Manual Page 77

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V2065