Yamaha RX-V2065 Owner's Manual download pdf (Page 62)

60 En

Using multi-zone configuration

You can select and control Zone2/3 by using the control

keys on the front panel or on the remote control. The

available operations are as follows:

• Selecting the input source.

• Tuning into the desired station (when “TUNER” is

selected as the input source).

• Adjusting the volume of Zone2/3 (when Zone2/3

speakers are connected to the EXTRA SP terminals).

Before controlling Zone2/3 by using the control keys on

the front panel or on the remote control, follow the

procedure below to switch this unit to the Zone2/3

operation mode.

■ To control Zone2/3 by using the front panel

control keys

Press DZONE CONTROLS repeatedly to select

the zone you want to control while the target

zone is turned on.

The zone indicator flashes on the front panel display for

approximately 10 seconds.

Note

• Complete each step while the zone indicator is flashing on the front panel

display. Otherwise, the Zone2 or Zone3 operation mode is automatically

canceled and this unit returns to the main zone operation mode.

■ To control Zone2/3 by using the remote

control

Switch bZone selection switch to “ZONE2”

or “ZONE3” position.

■ Turning on or set Zone2 to standby

Press AZONE2 ON/OFF (or pPOWER).

■ Turning on or set Zone3 to standby

Press CZONE3 ON/OFF (or pPOWER).

■ Operating Zone2/3

Rotate the TINPUT selector (or press dInput

selection key) to select the desired input

source.

If you press dUSB/NET on the remote control, press

wSub-input selection key to select a sub-input

source.

• Select “AV5”, “AV6”, “AUDIO1”, “AUDIO2” or

“PHONO” to listen to the input source in the selected

zone.

• Select “DOCK” to use the iPod features (page 35) or

Bluetooth features (page 37) in the selected zone.

• Select “TUNER” to use the FM/AM radio features

(page 31) in the selected zone.

• Select “USB” to use the USB features (page 38) in the

selected zone.

• Select “NET RADIO” to use the Internet Radio features

(page 41) in the selected zone.

• Select “PC” to use the PC features (page 39) in the

selected zone.

Note

• The sub-input source (USB, NET RADIO and PC) for “USB/NET” is

shared among all zones (main, Zone2 and Zone3). You cannot select

different sub-input source for each zone.

Controlling Zone2/3

Switching to the Zone2/3 operation mode

ZONE

Flashes

ZONE

Flashes

Operations in the Zone2/3 operation mode

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 181 182

Comments to this Manuals

No comments

Yamaha RX-V2065 Owner's Manual Page 62

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V2065