Yamaha RX-V1065 Owner's Manual download pdf (Page 64)

60 En

Troubleshooting

The picture is

disturbed.

The video software is copy-protected.

No sound. Incorrect input or output cable

connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

No appropriate input source has been

selected.

Rotate the RINPUT selector (or press dInput

selection key) to select the desired input source.

Speaker connections are not secure. Secure the connections. 11

The volume is turned down or muted. Turn up the volume. 23

Signals this unit cannot reproduce are

being input from a source component,

such as a CD-ROM.

Display “Signal Info” in the Option menu and check

the input signal format.

If “No Signal” is displayed, check if the playback

component is properly connected to this unit (or a

proper input source is selected).

If “___” is displayed, the input signal in that format

cannot be reproduced by this unit.

—

The HDMI components connected to this

unit do not support the HDCP copy

protection standards.

Connect HDMI components that support the HDCP

copy protection standards.

“Audio Output” in “HDMI” is set to

“TV”.

Set “Audio Output” (Function Setup → HDMI →

Audio Output) to the other setting.

A proper audio decoder is not selected. Display the Option menu and set “Decoder Mode” to

“Auto”.

Only the center

speaker outputs

substantial sound.

When a monaural source sound field

program is applied, sound of all channels

are output from the center speaker for

some surround decoders.

Try another sound field program. 26

The playback component or speakers are

not connected properly.

Connect the cables properly. If the problem persists,

the cables may be defective.

12, 15

No sound is output

from a specific

speaker.

Output from that speaker is disabled. Check the Speaker indicators on the front panel

display. If the corresponding indicator is turned off,

try the following.

1) Change the input source to another one.

2) With the selected sound field program, sound is not

output from that speaker. Select another sound field

program.

3) “None” may have been selected for that speaker on

this unit. Display “Speaker Setup” in the “Setup”

menu and enables output of that speaker.

6, 23, 26,

The volume of that speaker is set to

minimum in “Speaker Setup” in the

“Setup” menu.

Display “Speaker Setup” in the “Setup” menu and

adjust the volume (Manual Setup → Speaker Level).

This unit is in the straight decode mode. Press OSTRAIGHT (or gSTRAIGHT) to turn

off the straight decode mode.

Sound may not be output from certain

channels depending on input sources or

sound field programs.

Try another sound field program. 26

The speaker is malfunction. Check the speaker indicators on the front panel

display. If the corresponding indicator lights up,

connect another speaker and check if sound is output.

If sound is not output, this unit may be malfunction.

—

Problem Cause Remedy

See

page

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 315 316

Comments to this Manuals

No comments

Yamaha RX-V1065 Owner's Manual Page 64

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1065