Yamaha RX-V1065 Owner's Manual download pdf (Page 56)

54 En

Using multi-zone configuration

You can select and control Zone2 by using the control

keys on the front panel or on the remote control. The

available operations are as follows:

• Selecting the input source.

• Tuning into the desired station (when “TUNER” is

selected as the input source)

• Adjusting the volume of Zone2 (when Zone2 speakers

are connected to the EXTRA SP terminals).

Before controlling Zone2 by using the control keys on the

front panel or on the remote control, follow the procedure

below to switch this unit to the Zone2 operation mode.

■ To control Zone2 by using the front panel

control keys

Press CZONE2 CONTROL while Zone2 is

turned on.

The ZONE2 indicator flashes on the front panel display

for approximately 10 seconds.

Note

• Complete each step while the ZONE2 indicator is flashing on the front

panel display. Otherwise, the Zone2 mode is automatically canceled and

this unit returns to the main zone operation mode.

■ To control Zone2 by using the remote control

Switch bMAIN/ZONE2 to the “ZONE2”

position.

■ Turning on or set Zone2 to standby

Press AZONE2 ON/OFF (or pPOWER).

■ Operating Zone2

Rotate the RINPUT selector (or press dInput

selection key) to select the desired input

source.

• Select “AV5”, “AV6”, “AUDIO1”, “AUDIO2”, “V-

AUX” or “PHONO” to listen to the input source in

Zone2.

• Select “TUNER” to use the FM/AM radio features

(page 30) in Zone2.

• Select “USB” to use the USB features (page 37) in

Zone2.

• Select “DOCK” to use the iPod features (page 34) or

Bluetooth features (page 36) in Zone2.

Controlling Zone2

Switching to the Zone2 operation mode

Operations in the Zone2 operation mode

ZONE

Flashes

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 163 164

Comments to this Manuals

No comments

Yamaha RX-V1065 Owner's Manual Page 56

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1065