Yamaha RX-V1065 Owner's Manual download pdf (Page 49)

47 En

Operating various settings for this unit (Setup menu)

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Bass Crossover Frequency

Sets the lower limit of the low-frequency component

output from a speaker with a size set to “Small” (Small x

1, Small x 2) Sound with a frequency below that limit is

output from a subwoofer or front speakers.

If your subwoofer has a volume control or a crossover

frequency control, set the volume to half or the crossover

frequency at the maximum.

Subwoofer Phase

Sets the phase of your subwoofer if bass sounds are

lacking or unclear.

■ Speaker Level

Separately adjusts volume of each speaker so that the

sounds form speakers are at the same volume at the

listening position. Items to be displayed vary depending

on the number of speakers connected.

• When only one surround back speaker is connected, “SB” appears

instead of “SBL” and “SBR”.

• You can adjust the volume listening to test tones when you set “Test

Tone” to “On” (on this page).

• If your subwoofer has a volume control or a crossover frequency control,

set the volume to half or the crossover frequency at the maximum.

■ Speaker Distance

Adjusts timing at which each speaker outputs sound so

that sounds from speakers reach the listening position at

the same time. Set unit (Unit) first and set the distance of

each speaker.

Unit

FR.L / FR.R / CNTR / SUR.L / SUR.R / SBL / SBR /

SWFR / PR.L / PR.R

• Available items differ depending on the “Speaker Configuration” settings

(page 45).

• When only one surround back speaker is connected, “SB” appears

instead of “SBL” and “SBR”.

■ Equalizer

Adjusts sound quality and tone using a parametric graphic

equalizer.

EQ Type Select

Selects an equalizer type.

GEQ

Adjusts sound quality of each speaker using a graphic

equalizer. The graphic equalizer of this unit can adjust

signal levels in 7 frequency ranges.

To adjust the signal level within each range, press

jCursor l / h to select the desired speaker while

“Channel” is selected, press jCursor k / n to select the

desired frequency band and then press jCursor l / h

to adjust the signal level.

■ Test Tone

Switches between on and off of an oscillator that generates

test tones. When “On” is selected, you can adjust the

settings of “Manual Setup” while listening to a test tone.

You can set various items for sound outputs.

■ Dynamic Range

Selects the dynamic range adjustment method for

reproducing bitstream signals.

Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz,

160Hz, 200Hz

Choices: Normal*, Reverse

Normal Select this not to change the phase of your

subwoofer.

Reverse Select this to reverse the phase of your

subwoofer.

Adjustable range: –10.0dB to +10.0dB (0.5dB step)

Defaults: 0dB (FR.L, FR.R, SWFR, PR.L, PR.R)

–1.0dB (CNTR, SUR.L, SUR.R, SBL, SBR)

Choices: meters (m)*, feet (ft)

meters (m) Displays the speaker distance in meters.

feet (ft) Displays the speaker distance in feet.

Adjustable range: 0.30m to 24.00m (1.0ft to 80.0ft)

Defaults: 3.00m (10.0ft) (FR.L, FR.R, SWFR, PR.L,

PR.R)

2.60m (8.5ft) (CNTR)

2.40m (8.0ft) (SUR.L, SUR.R, SBL, SBR)

Choices: Auto PEQ, GEQ*, Off

Auto PEQ Uses a parametric equalizer selected in

“Auto Setup”. Characteristics of the

currently used parametric equalizer are

displayed below “Auto PEQ”.

GEQ Uses a graphic equalizer. Press jENTER

to adjust the characteristics of the graphic

equalizer.

Off Not use a graphic equalizer.

Channels Front Left, Front Right, Center, Surround Left,

Surround Right, Surround Back Left, Surround

Back Right

Choices: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz,

16kHz

Adjustable range: –6.0dB to 0dB* to +6.0dB (0.5dB step)

Choices: Off*, On

Off Not generate test tones.

On Generates test tones.

Sound Setup

Choices: Min/Auto, STD, Max*

Min/Auto (Min) Sets the dynamic range suitable for

low volume or a quiet environment, such as

at night, for bitstream signals except for

Dolby TrueHD signals.

(Auto) Adjusts the dynamic range for Dolby

TrueHD signals based on input signal

information.

STD Sets the standard dynamic range

recommended for regular home use.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

Comments to this Manuals

No comments

Yamaha RX-V1065 Owner's Manual Page 49

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1065