Yamaha HTR-6230 Owner's Manual download pdf (Page 34)

32 En

Set menu

LFE signals output

Low-frequency signals output

Notes

*1 Outputs the low-frequency signals of the front channels and other

speakers to “SML” or “NONE.”

*2 Always output the low-frequency signals of the front channels.

*3 Output the low-frequency signals if the sizes of speakers are set to

“LARGE” (or “LRG”).

*4 Output the low-frequency signals of the speakers set to “SML.”

■ Crossover CROSSOVER

Use this feature to select a crossover frequency of all the

speakers set to “SML” (or “SMALL”) or to “NONE” in

“SPEAKER SET” (see pages 30 and 31).

Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Note

• All frequencies below the selected frequency will be sent to the

subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER

SET” (see pages 30 and 31).

■ Subwoofer phase SWFR PHASE

Use this feature to switch the phase of your subwoofer if

bass sounds are lacking or unclear.

Use this feature to manually adjust the output level of each

speaker.

Control range: –10 dB to 0 dB* to +10 dB

Control step: 1 dB

Notes

• The available speaker channels differ depending on the setting of the

speakers.

• This does not affect recorded material.

Use this feature to manually adjust the distance of each

speaker and the delay applied to the respective channel.

All sounds would be adjusted to arrive at the listening

position at the same time regardless of distance from each

speaker.

■ Unit UNIT

■ Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft)

Initial setting:

FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)

CENTER: 2.60 m (8.5 ft)

SUR. L/SUR. R: 2.40 m (8.0 ft)

Note

• The available speaker channels differ depending on the setting of the

speakers.

Use this feature to adjust the built-in 5-frequency band

(100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic

equalizer for the center channel so that the tonal quality of

the center speaker matches that of the front speakers.

Control range: –6.0 dB to 0 dB* to +6.0 dB

Control step: 0.5 dB

• Press lk / n to select a frequency band and ll / h to adjust the

selected frequency band.

• You can make adjustment while listening to the currently source or a test

tone.

Following is an example where “100Hz” is selected as the

frequency band.

Choice Subwoofer Front speakers Other speakers

BOTH* Output No output No output

SWFR Output No output No output

FRONT No output Output No output

Choice Subwoofer Front speakers Other speakers

BOTH**1 *2 *3

SWFR *4 *3 *3

FRONT No output *1 *3

Choice Function

NRM* Does not reverse the phase of your subwoofer.

REV Sets the phase of your subwoofer to reverse.

Speaker level B)SP LEVEL

SP LEVEL Adjusted speaker

FL Front left speaker

FR Front right speaker

C Center speaker

SL Surround left speaker

SR Surround right speaker

SWFR Subwoofer

Speaker distance C)SP DISTANCE

Choice Condition

meters* When you adjust speaker distances in meters.

feet When you adjust speaker distances in feet.

SP DISTANCE Adjusted speaker

FRONT L Front left speaker

FRONT R Front right speaker

CENTER Center speaker

SUR. L Surround left speaker

SUR. R Surround right speaker

SWFR Subwoofer

Center graphic equalizer D)CENTER GEQ

100Hz--||-- 0

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

Comments to this Manuals

No comments

Yamaha HTR-6230 Owner's Manual Page 34

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-6230