Yamaha HTR-5550 Owner's Manual download pdf (Page 26)

ADJUSTING SPEAKER OUTPUT LEVELS

4 Adjust the level of the

effect speakers using j / i

so that it matches the

level of the main

speakers.

While adjusting, the test tone

is heard from the selected

speaker.

Note

• To adjust the level of the main speakers, use VOLUME knob

(or VOLUME +/– on the remote control).

5 When adjustment is

complete, press TEST to

stop the test tone.

Notes

• If “1A CENTER” on the SET MENU is set to NON and the

center speaker is not connected, the center channel sound is

automatically output from the main left and right speakers.

• If “1C REAR LR” on the SET MENU is set to NON, the

output level of the rear left and right speakers cannot be

adjusted in step 4. The test tone will be circulated skipping the

rear right and left speakers.

• If “1D BASS” on the SET MENU is set to MAIN, the test tone

will be circulated skipping the subwoofer.

• It is not necessary to readjust the speaker levels once they are

set (as long as you do not change the speakers). You can enjoy

listening to or watching the input source at the desired volume

simply by adjusting the VOLUME knob (or VOLUME +/– on

the remote control).

• If the output level of the effect speakers (center, rear left, and

rear right) cannot be increased enough to match the level of the

main speakers, set “1E MAIN Lv” on SET MENU to –10 dB

(see page 42). This setting decreases the main speaker output

level to about one-third of the normal level. After you have set

“1E MAIN Lv” on the SET MENU to –10 dB, adjust the levels

for the center and rear speakers again.

SELECT

PRESET/CH

–

TEST

RETURN

0104HTR5550_20-22_EN(U) 12/27/01, 2:51 PM22

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 66 67

Comments to this Manuals

No comments

Yamaha HTR-5550 Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-5550