Yamaha HTR-4063 Owner's Manual download pdf (Page 67)

En 67

SETUP

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If you connect devices

that support HDMI Control (ex. Panasonic VIERA Link-

compatible TVs, DVD/Blu-ray Disc recorders, etc.) J1, you can

use the following operations with the remote control of any of

those devices:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV, DVD recorder supporting HDMI

Control to this unit’s HDMI output jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Set the TV and this unit’s HDMI Control function to

“On.”

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, turn them off manually.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (ex. HDMI1).

If DVD recorder that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized with

the TV through the following operations by using the

TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a DVD recorder. Follow the instructions in your TV and

DVD recorder manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

Receiver unit Confirm that “Control” in the Setup menu (HDMI

Setup) is set to “On” (☞p. 55). J2

TV/DVD Recorder Check the instruction manuals for those devices.

Receiver unit Confirm that the input source for the DVD recorder

has been selected. If a different input source has been

selected, please change it manually.

TV/DVD Recorder Confirm that the video signal from the recorder is

being properly received by the TV.

Operations 1-7 will not be required more than twice.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the devices and turning them on and off may solve the

problem.

1 : We recommend that you use TVs and DVD/BD recorders from the same

manufacturer whenever possible.

2 : The default setting for the HDMI Control function is “Off.”

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 82 83

Comments to this Manuals

No comments

Yamaha HTR-4063 Owner's Manual Page 67

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-4063