Yamaha DVX-S120 Owner's Manual download pdf (Page 94)

Using the SET MENU

Adjust the playback level of the LFE signal

(* LEF Level)

You can adjust the LFE channel output level while

playing a Dolby Digital or DTS signal. Adjust the LFE

level to match the performance of the Subwoofer and

headphones.

Submenu: SP LFE, HP LFE

Variable range (dB): -20 to 0 dB.

Default setting: 0 dB

Virtual Center Speaker Position

Set the dynamic range during Dolby Digital

playback (* D. Range)

You can select the dynamic range (spread between the

max. and min. volume) of Dolby Digital playback from

3 levels.

Submenu: SP D.R, HP D.R

Selection items: MAX (Maximum), STD (Standard),

MIN (Minimum)

Default setting: MAX

MAX: Plays back the dynamic range of the source at the

maximum limit.

STD: Dynamic range recommended by software

manufacturers for home use.

MIN: Easy to hear even at a low volume, dynamic range

suitable for evening listening.

Set the Delay Time of the Center Speaker (*

SP Delay)

You can set the Delay Time of the Center Speaker. This

is effective when the Center Speaker outputs sound

during Dolby Digital or DTS playback.

Normally the Center Speaker and Front L/R Speakers

are placed in line with each other. However, they should

be placed at an equal distance from the listener so that

the sound each one outputs enters the listener’s ear at the

same time. With Delay Time, the Center Speaker can be

moved to an ideal position further away to match the

distance of each speaker to the listener. Center Delay is

effective in adding depth to the sound field and presence

to speech.

Variable range (ms): 0 to 5 ms

Default setting: 0 ms

Press w to set the speaker’s virtual position further

away. Press q to set it closer.

• Every 1 ms increase in Delay Time increases the distance

away from the listening position by 30 cm (1 foot).

Advice

• Depending on the Dolby Digital playback source, the MIN

dynamic range may not work and result in an extremely low

volume. In this case, set the dynamic range to MAX or STD.

Adjust the volume balance of the Front

Speakers (* L/R Balance)

You can set the volume balance of the Front L/R

Speakers. This setting also applies to Headphones.

Variable range: L/R 10 levels

Default setting: Center

Press w to make the sound smaller in the Front Left

Speaker, and press q to make the sound smaller in the

Front Right Speaker. You cannot turn off the sound for

either one of the Front Speaker.

Adjust the sound quality of headphones

(* HP Tone CTRL)

You can adjust the low tones (BASS) and high tones

(TRBL) of your headphones.

Submenu: HP BASS, HP TRBL

Variable range (dB): -6 to +3 dB.

Default setting: 0 dB

Press w to increase the range of the low or high tones.

Press q to decrease the range.

Note

017DVX-S120-en 03.8.5, 1:50 PM90

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 113 114

Comments to this Manuals

No comments

Yamaha DVX-S120 Owner's Manual Page 94

Comments to this Manuals

Related products and manuals for AV receivers Yamaha DVX-S120