Yamaha NUAGE Specifications download pdf (Page 19)

Description of the Device

NUAGE MASTER Operation Manual 19

Cycle Marker Jump Function

In the Cycle Marker Jump function, you can set the Project

Cursor to the Cycle Marker position by inputting the

Marker ID of the Cycle Marker. When you press [CYCLE .]

in the Marker mode, [CYCLE .] is lit, and the Cycle Marker

Jump pop-up window is shown on the [Multi function

display]. However, when the MARKER Page (page 42) in

the TRANSPORT page is called up in the [Multi function

display], the pop-up window is shown on the Label Pane

area.

When a page other than MARKER is called up in

the [Multi function display]

When the MARKER page is called up in the [Multi

function display]

1 Current Position

Displays the current Project Cursor position.

2 Locate To Cycle Marker

Inputs the Marker ID.

3 Marker Position

Displays the Marker position of the Marker ID input to

Locate To Cycle Marker.

4 Marker Name

Displays the Marker name of the Marker ID input to Locate

To Cycle Marker.

When the Cycle Marker Jump pop-up window is shown,

the [Input keys] have the following functions.

3 [PARAM]

Sets the [Input keys] mode to Parameter. In the Parameter

mode, you can directly input a number value to the

parameter in the page called up in the [Multi function

display]. In the Parameter mode, the parameter is focused

before inputting a value when you touch a valid parameter

for editing. To input the parameter value, enter it with the

[Input keys] then press [ENTER].

In the Parameter mode, the [Input keys] have the following

functions.

[Input keys] Function

[0] – [9] For inputting numbers to the input position.

[]/[] When the Marker window is open, moves the

marker selection.

[BACK SPACE] Deletes the number at the input position.

[CLEAR] Deletes all input numbers.

[SET] Selects the Set mode (the button lights).

[PREV -] Adds -1 to the input number.

[NEXT +] Adds +1 to the input number.

[CYCLE .] Selects the Marker Jump function (the button

is unlit).

[ESC] Cancels the input then closes the pop-up

window.

[ENTER] Determines the input then closes the pop-up

window.

[Input keys] Function

[0] – [9] For inputting numbers to the input position.

[]/[] Moves the input digit right and left.

[BACK SPACE] Deletes the number at the input position.

[CLEAR] Deletes all input numbers.

[SET] Selects the Set mode (the button lights).

[PREV -] Inputs “-.”

[NEXT +] Inputs “+.”

[CYCLE .] Inputs a decimal point.

[ESC] Cancels the input.

[ENTER] Determines the input.

[Input keys] Function

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments

Yamaha NUAGE Specifications Page 19

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha NUAGE