Yamaha MY4 Owner's Manual download pdf (Page 10)

10 MY4-AEC Owner’s Manual

Euroblock Connection

Please be sure to use the supplied Euroblock plugs to connect the AES/EBU [IN] and [OUT]

connectors.

Cable preparation

• To prepare the cable for attachment to a Euroblock

connector, strip the wire as shown in the illustration

using stranded wire to make connections. With a

Euroblock connection, stranded wires may be prone to

breakage because of metal fatigue due to the weight of

the cable or due to vibration. Bundle the cables and the

Euroblock tabs using the supplied cable ties (page 12). When rackmounting your

equipment, use a lacing bar when possible to bundle and fasten the cables.

NOTE

Do not tin (plate with solder) the exposed end.

• If cables will be frequently connected and

disconnected, as in the case of a portable installation,

we recommend that you use ferrules with insulation

sleeves. Use a ferrule whose conductor portion has an

external diameter of 1.6 mm or less, and a length of

approximately 7 mm (such as the AI0,5-6WH made by

the Phoenix Contact corporation).

approx.

7 mm

1.6 mm or less

approx.

7 mm

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

No comments

Yamaha MY4 Owner's Manual Page 10