Yamaha XP7000 Owner's Manual download pdf (Page 14)

14 XP7000/XP5000/XP3500/XP2500/XP1000 Owner’s Manual

* These speciﬁcations apply to rated power supplies of 120V, 230V and 240V.

0 dBu=0.775 Vrms, Half Power=1/2 Output Power (3 dB below rated power)

Speciﬁcations and descriptions in this owner’s manual are for information pur-

poses only.

Yamaha Corp. reserves the right to change or modify products or speciﬁca-

tions at any time without prior notice. Since speciﬁcations, equipment or

options may not be the same in every locale, please check with your Yamaha

dealer.

European models

Purchaser/User Information speciﬁed in EN55103-1 and EN55103-2.

Inrush Current: XP7000/5000 25A , XP3500 22A, XP2500 20A, XP1000 14A

Conforms to Environments: E1, E2, E3 and E4

All Models

Power Bandwidth Half Power, THD+N= 0.5 % MIN 10 Hz-40 kHz

THD+N 20 Hz–20 kHz, Half Power MAX 0.1 %

Intermoduration Distortion 60 Hz:7 kHz, 4:1, Half Power MAX 0.1 %

Frequency Response RL=8 Ω, Po=1 W, HPF=OFF

20 Hz-50 kHz

MAX 0 dB

TYP 0 dB

MIN -1 dB

Channel Separation Half Power, RL=8 Ω, 1 kHz,

Att. max, input 600 Ω shunt

MIN 70 dB

Residual Noise 20 Hz–20 kHz, Att. min,

(DIN AUDIO)

MAX -70 dBu

Damping Factor RL=8 Ω, 1 kHz MIN 350 (XP7000, XP5000), 200 (XP3500, XP2500, XP1000)

Voltage Gain Att. max XP7000 XP5000 XP3500 XP2500 XP1000

TYP Selectable from 32 dB or 26 dB (or +4 dBu input sensitivity) by select switch

+4 dBu

position

35.7 dB 34.2 dB 32.7 dB 31.2 dB 27.2 dB

Input Sensitivity (dBu) Att. max

(Rated Power 8 Ω,

20Hz–20kHz, THD+N = 0.1%)

XP7000 XP5000 XP3500 XP2500 XP1000

+4 dBu

position

+4 dBu +4 dBu +4 dBu +4 dBu +4 dBu

26 dB

position

+13.7 dBu

(120V / 240V)

+13.6 dBu

(230V)

+12.2 dBu +10.7 dBu +9.2 dBu +5.2 dBu

32 dB

position

+7.7 dBu

(120V / 240V)

+7.6 dBu

(230V)

+6.2 dBu +4.7 dBu +3.2 dBu -0.8 dBu

Maximum Input Voltage MIN +22 dBu

Input Impedance TYP 20 kΩ (balanced), 10 kΩ (unbalanced)

Controls Front Panel POWER switch (push on/push off)

attenuator (31 position) x 2

Rear Panel MODE switch (STEREO/BRIDGED/PARALLEL) x 1

HPF switch (20 Hz/55 Hz/OFF 12 dB/oct) x 2

GAIN SELECT switch (32 dB/26 dB/+4 dBu) x 1

Connectors Input XLR-3-31 type/ch, Euroblock connector (balanced) /ch

Output SPEAKON/ch, 5 way binding post x 1

MONITOR/REMOTE Dsub 15 P x 1

Indicators POWER/STANDBY x 1 (Green/Orange)

SIGNAL x 2 (Green)

CLIP/LIMIT x 2 (Red)

PROTECTION/TEMP x 1 (Red)

x 1 (Red) heatsink temp. ≥ 85 °C

Load Protection POWER switch on/off mute

DC-fault:

power supply shutdown/operation not restored automatically. (XP7000, XP5000)

output relay off/restored automatically. (XP3500, XP2500, XP1000)

Clip limiting : THD ≥ 0.5 %

Ampliﬁer Protection Thermal:

Cuts the output (heatsink temp. ≥ 90 °C) ; operation not restored automatically.

VI limiter (RL ≤ 1

Ω): Limit the output.

Power Supply Protection Thermal:

Power supply shutdown (heatsink temp. ≥ 100 °C) ; operation not restored auto-

matically. (XP7000, XP5000).

power supply shutdown (transfomer temp. ≥ 130 °C)

; restored automatically. (XP3500, XP2500, XP1000)

Cooling Variable-speed fan: x 1(XP3500, XP2500, XP1000), x 2 (XP7000, XP5000)

Fan stop at heatsink temp. < 55 °C

Power Requirements 120V, 220V–240V; 50Hz/60Hz

Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16")

Weight XP7000 XP5000 XP3500 XP2500 XP1000

14.0 kg

(30.9 lbs)

14.0 kg

(30.9 lbs)

15.0 kg

(33.1 lbs)

14.0 kg

(30.9 lbs)

12 kg

(26.5 lbs)

Included Accessories Security cover (with a hex wrench), Owner’s Manual

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Yamaha XP7000 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Audio amplifiers Yamaha XP7000