Yamaha XP2500 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
UC : US & Canadian Models
EU : European Models
A : Australian Models
Model XP7000 XP5000 XP3500 XP2500 XP1000
Output Power 8 700W+700W 500W+500W 350W+350W 250W+250W 100W+100W
20Hz – 20kHz 690W+690W(EU) 110W+110W(US)
THD+N=0.1% 4 950W+950W 700W+700W 450W+450W 300W+300W 125W+125W(US)
435W+435W(EU) 295W+295W(EU) 115W+115W(EU)
110W+110W(A)
70V/STEREO RL=8 625W+625W ----
8/BRIDGE 1900W 1400W 900W, 870W(EU) 600W, 590W(EU) 250W(US), 230(EU), 220W(A)
100V/BRIDGE RL=16 - - 625W - -
S/N Ratio
20Hz-20kHz
104dB 103dB 102dB 100dB 96dB
Idle Power Consumption 35W 35W 35W 30W 25W 20W
1/8 Power Consumption (4/Pink noise)
650W 500W 450W 320W 170W
Power Bandwidth
(half power THD+N=0.5%)
10Hz-40kHz
THD+N
20Hz – 20kHz, half power
0.1%
Intermodulation Distortion
60Hz: 7kHz, 4:1, half power
0.1%
Frequency Response
RL=8, Po=1W,HPF=OFF
0dB
Channel Separation
Half power RL=8 1kHz
70dB
ATT. Max input 600 shunt
Residual Noise Att. min
20Hz-20kHz (DIN AUDIO)
-70dBu
Damping Factor
8, f=1kHz
350(XP7000, XP5000) / 200(XP3500, XP2500, XP1000)
Voltage Gain
ATT. max
32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Input Impedance 20k(balance) 10k(unbalance)
Controls Front panel POWER switch(push on/push off), attenuator(31position) x 2
Rear panel MODE switch(STEREO/BRIDGE/PARALLEL) x 1, HPF switch (20Hz/55Hz/OFF 12dB/oct) x 2, GAIN SELECT switch(32dB/26dB/+4dBu) x 1
Connectors Input XLR-3-31 type/ch, Euroblock connector(balance)/ch
Output SPEAKON/ch, 5way binding post x 1
MONITOR/REMOTE Dsub15P x 1
Indicators POWER/STANDBY x 1(Green/Orange), SIGNAL x 2(Green), CLIP/LIMIT x 2(Red),
PROTECTION x 1(Red), TEMP x 1(Red) heatsink temp
85°C
Load Protection POWER switch on/off mute, DC-fault:power supply shutdown/do not return automatically.(XP7000, 5000), output relay off/return automatically.(XP3500,2500,1000)
Amplifier Protection thermal: cut the output(heatsink temp
90°C) do not return automatically.
VI limitter(RL 1): Limit the output
Power suplly protection thermal: power supply shutdown(heatsink temp
100°C)
do not return automatically.(XP7000,5000),
power supply shutdown(transfomer temp
130°C)return automatically.(XP3500,2500,1000)
Cooling Variable-speed fan: x 1(XP3500, 2500, 1000), x 2(XP7000, 5000) (Fan stop at heatsink temp 55°C)
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16")
Weight 14kg (30.9 Ibs.) 14kg (30.9 Ibs.) 15kg (33.1 Ibs.) 14kg (30.9 Ibs.) 12kg (26.5 Ibs.)
• 0dB=0.775V Half power=1/2 power output level
* Specifications and appearance subject to change without notice.
Monitor / Remote terminals enabling
remote monitoring and control
High-accuracy 1dB-step detented
attenuator and high-pass filter for
switching the cut-off frequency
Various protection circuits, indicators and
stepless low-noise fans
Best matches with digital mixing engine
DME64N/24N and Installation series
speakers
Specification
Page view 3
1 2 3 4

Comments to this Manuals

No comments