Yamaha MCR-042 Owner's Manual download pdf (Page 4)

2 En

Connect the speakers and antenna.

If you use a commercially available outdo

or antenna instead of the supplied antenna, reception may be better.

If DAB/FM reception is poor, try changing the height or direction or placement of the antenna to find a location that has better

reception.

Do not connect this unit’s power cable until you’ve finished connecting all cables.

When you’ve completed all connections, con

nect this unit’s power cable to an AC outlet.

CONNECTIONS

Connecting the speakers and antenna

Connecting the power cable

Speakers

• You must peel off the insulation (covering) from the tip of the speaker cable to

expose the conductor.

• Check the connections; make sure that left and right (L, R) and polarity (red: +,

black: –) are connected correctly. If connections are incorrect, the sound will be

unnatural and the low frequencies may be insufficient. There might not be any

sound at all if connections are incorrect.

• Take care that the conductors of the speaker cable do not touch each other, and that

the conductors do not touch any other metal part. Such conditions can damage this

unit or the speakers.

• Use only the supplied speakers. Using other speakers may result in unnatural sound.

• If you’re using this unit nearby a CRT display and you notice distorted color or

noise in the display, move the speakers farther away from the display.

Twist the bare wires

tightly so the individual

strands are not splayed.

DAB/FM antenna

Be sure to stretch out the antenna.

To the AC

wall outlet

Rear panel

1 2 3 4 5 6 7 8 9 ... 30 31

No comments

Yamaha MCR-042 Owner's Manual Page 4