4
•To relocate the unit, turn the power switch off, remove
the power plug from the AC outlet, and remove all con-
necting cables. Damaged cables may cause fire or electri-
cal shock.
•This unit is heavy. Use two or more people to carry it.
•Allow enough free space around the unit for normal
ventilation. This should be: 10 cm at the sides, 30 cm
behind, and 60 cm above.
If the airflow is not adequate, the unit will heat up inside
and may cause a fire.
•Turn off all musical instruments, and audio equipment
when connecting to this unit. Use the correct connecting
cables and connect as specified.
•Always lower the volume control to minimum before
turning on the power to this unit. A sudden blast of
sound may damage your hearing.
•Do not output distorted sounds for long periods of time,
as this will cause the speaker to heat up, leading to a fire
hazard.
•Do not raise the volume of headphones or speakers to a
level that makes you feel uncomfortable. Listening to
loud music for long periods can damage your hearing.
•If you know you will not use this unit for a long period
of time, such as when going on vacation, remove the
power plug from the AC outlet. Leaving it connected is a
potential fire hazard.
•To prevent electrical shock when cleaning the unit,
remove the power plug from the AC outlet.
• XLR-type connectors are wired as follows: pin 1: ground,
pin 2: hot (+), and pin 3: cold (–).
•Using a mobile telephone near this unit may induce
noise. If noise occurs, use the telephone away from the
unit.
•This speaker is magnetic shielded. However, if a nearby
monitor displays any uneven colors, place it further away
from the monitor.
•You may feel a flow of air in and out of the port on this
unit. This is not abnormal and sometimes occurs when a
program with a lot of bass range is played.
Operation
Maintenance
PRECAUTIONS – for correct operation –
Connector pin assignments
Influence on cell phone usage
Operation
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured GREEN and YELLOW must be
connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol or coloured GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
* This applies only to products distributed by YAMAHA KEMBLE
MUSIC (U.K.) LTD.
(7 pages)
(7 pages)
(6 pages)
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals