Yamaha QL5 User's Guide download pdf

QL5/QL1 Firmware Update Guide 1

QL5/QL1 Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the QL series (QL5 and QL1) firmware and its built-in Dante

module firmware.

■ Important Notice

・ From V3.10, it was made possible to use a USB memory to also update the Dante module

firmware.

・ Although the QL series firmware (main/sub) can be updated together at the same time by using

the USB memory to update the Dante module firmware, updating the Dante firmware will take

approximately 10 minutes.

・ Although using a computer (Dante Firmware Update Manager) to update the Dante firmware in

the conventional manner reduces the amount of time required for the Dante firmware update, it

is necessary to update the QL series firmware by using a USB memory separately.

■

Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ Update the firmware components one unit at a time.

・ Please note that the device may be damaged if you fail to follow these instructions properly, or

turn off the device or disconnect the cable while the update is in progress.

・ If the update fails, and the device still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・ Yamaha Corporation owns exclusive copyrights for the QL series firmware, its update program,

and the update guide.

・ Audinate owns exclusive copyrights for the Dante firmware and its update program.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety,

without permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be different

from the actual screen shots.

・ Dante is a registered trademark of Audinate.

・ Windows is a registered trademark of Microsoft ® Corporation in the United States and other

countries.

・ The company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

1 2 3 4 5 6 ... 16 17

Summary of Contents

Page 1 - ■ Important Notice

QL5/QL1 Firmware Update Guide 1 QL5/QL1 Firmware Update Guide Thank you for choosing a Yamaha product. This guide explains how to update the QL

Page 2 - Preparing for the update

QL5/QL1 Firmware Update Guide 10 ・ The “Windows Security” dialog box may appear. In such case, click [Install this driver software anyway]. ・

Page 3 - Update procedure sequence

QL5/QL1 Firmware Update Guide 11 6. Click [OK]. Updating the Dante firmware Described below are the procedures to update the Dante module f

Page 4

QL5/QL1 Firmware Update Guide 12 3. If you see the interface selection screen, select the interface card to connect the Dante device. 4. Click

Page 5

QL5/QL1 Firmware Update Guide 13 running. 8. Click [Start]. The update operation will begin. “Updating(n/m)” appears in the Status field during

Page 6

QL5/QL1 Firmware Update Guide 14 About Failsafe Mode The Dante module integrated in the QL may become unusable due to data corruption if the D

Page 7

QL5/QL1 Firmware Update Guide 15 Recovery procedure sequence Recover in the following sequence. Preparing for recovery Install the Dante Firmw

Page 8

QL5/QL1 Firmware Update Guide 16 5. Disable all but one of the network interfaces on your computer. You should also disable the wireless LAN. 6.

Page 9

QL5/QL1 Firmware Update Guide 17 13. Exit the Dante Firmware Update Manager, and wait for two minutes before turning off the power to the QL m

Page 10

QL5/QL1 Firmware Update Guide 2 Checking the version number You may check the QL main firmware version number and the Dante firmware version n

Page 11

QL5/QL1 Firmware Update Guide 3 Update procedure sequence Update each firmware component in the following sequence. If you plan to update mult

Page 12

QL5/QL1 Firmware Update Guide 4 Updating the QL series firmware Described below are the procedures to update the QL series unit firmware. Unco

Page 13 - Restart the QL series

QL5/QL1 Firmware Update Guide 5 message flashes for approximately one minute. While this message is flashing, do not turn off the power. If you h

Page 14 - Preparing for recovery

QL5/QL1 Firmware Update Guide 6 Updating the QL NAME SUB CPU Firmware Described below are the procedures to update the NAME SUB CPU of the QL

Page 15

QL5/QL1 Firmware Update Guide 7 Service" is displayed. Please contact your Yamaha dealer. Updating the Dante Firmware Described below ar

Page 16

QL5/QL1 Firmware Update Guide 8 [CLOSE] button. 4. If the message "Please re-start the system" is displayed, remove the USB memory and

Page 17

QL5/QL1 Firmware Update Guide 9 Updating the Dante firmware by using PC application. Described below are the procedures to update the Dante fi

Comments to this Manuals

No comments

Yamaha QL5 User's Guide

Browse online or download User's Guide for Touch screen monitors Yamaha QL5. Yamaha QL5 User manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Touch screen monitors Yamaha QL5