HOME CINEMA SPEAKER PACKAGESYSTEME D ’ENCEINTES HOME CINEMANS-P300Active ServoTechnologyU C A CONTENTSSAFETY INSTRUCTIONS ...
10If your amplifier has only one set of main speaker output terminalsOUTPUTTO SPEAKERSINPUT1FROM AMPLIFIEROUTPUTTO SPEAKERSINPUT1FROM AMPLIFIERINPUT2H
11English• To connect with a YAMAHA DSP amplifier (or AV receiver),connect the LOW PASS (or SUBWOOFER etc.) terminal onthe rear of the DSP amplifier (
121OUTPUT (TO SPEAKERS) terminalsCan be used for connections with the main speakers.These terminals output signals sent from the amplifier tothe main
13English1 Set the VOLUME control to minimum.2 Turn on the power supply to all the components.3 Play any source and adjust the amplifier’s volume cont
14The theory of Active Servo Technology is based upon twomajor factors, the Helmholtz resonator and negative-impedance drive. Active Servo Processing
15EnglishSYMPTOMPower is not supplied even though thePOWER switch is set to the ON position.No sound.Sound level is too low.This unit will not turn on
16<NS-M103, NS-C103, NS-E103>Type<NS-M103>...2-way acoustic-suspension speaker system Magnetic shielding type<NS-C103> ...2-
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,
21 Read Instructions – All the safety and operatinginstructions should be read before the unit is operated.2 Retain Instructions – The safety and ope
3English1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!This product, when installed as indicated in theinstructions contained in this manual, meets FCC
4●To assure the finest performance, please read this manualcarefully. Keep it in a safe place for future reference.●Install the speakers in a cool, d
5EnglishBefore you make connections, place all speakers in their proper positions respectively. The positioning of speakers is important,because it co
6 Mounting the center speakerPlace the center speaker on the TV, on the floor under the TVor in the TV rack so that it is stabilized.When placing the
7English Mounting the effect speakersMount the effect speakers on a shelf, rack or floor, or hangthem on the wall.To mount the effect speakers on a w
8• Connect the speakers to the speaker output terminals ofyour amplifier with the provided speaker cords.• Connect the speakers making sure not to rev
9EnglishFor connections, keep the speaker cords as short as possible.Do not bundle or roll up an excess of the cords. If theconnections are faulty, no
Comments to this Manuals