Yamaha PJP-100UH User Manual

PJP-25URConference Microphone SpeakerUser's Manual

8 Adjusting the speaker volumePress VOLUME +/– to adjust the speaker volume. Holding either key increases or decreases the volume continuously. Turn

9OPERATIONSBy installing and using the PJP-25UR Controller included in the supplied CD-ROM, you can adjust the unit's settings such as the microp

106 Select the folder to which the files are saved, and then click "Next".To change the destination folder, click "Change" and sel

11OPERATIONSThis section explains about the basic operations of the PJP-25UR Controller.1 Connect this unit to the computer using the supplied USB cab

12yTo switch between HOME and DETAIL screens, click or . When the operation mode is set to "Speaker", the DETAIL screen is not available.

13OPERATIONS@ Operation mode settingSelect the operation mode of this unit. To enable both the microphones and speaker (as in the case of a conference

14You can check the installation method suited to your purpose of using this unit. In this procedure, we will check the installation method suited to

15OPERATIONSFollow the procedure below to save the settings currently configured on this unit.1 In the "PJP-25UR Controller" screen, click &

16Follow the procedure below to reset the settings of this unit. You can specify whether to keep the settings saved to the setting numbers.Please note

17OPERATIONSYou can download the fi rmware (program to control the functions of this unit) to use the latest features.To use the revision upgrading fu

18• Firmware update is available only if the computer connecting to this unit is connected to the Internet.• Once the firmware update is started, do n

19ADDITIONAL INFORMATIONRefer to the following tables when this unit does not function properly. If the problem you are experiencing is not listed or

20Interface:USB 2.0 (full), Analog I/O (stereo-mini), AC adapter (DC 5V IN)Power consumption (max):USB bus power: 2.5 W or less, Self power: 3.0 W or

(December 2007, 1st edition)

1PREPARATIONINTRODUCTIONADDITIONAL INFORMATIONOPERATIONSIntroduction ...2

2Thank you for purchasing Yamaha PJP-25UR. This product is a microphone/speaker unit to be connected to a computer with the USB cable for use as its a

3INTRODUCTION1 Arrayed microphonesPicks up the talker's voice.2 SpeakerOutputs the sounds.3 MENU/PCPress to activate the PJP-25UR Controller.4 SH

4 Other1LabelProvides the following information.• MODEL No.: Model number of this unit• SER.: Serial number of this unit2 Tripod socket holeUse to co

5PREPARATION USB cableUse the USB cable supplied with this unit. System requirementThe computer connected to this unit should meet the following sys

6After connecting this unit to the computer, follow the procedure below to check whether the computer recognizes this unit properly. In this procedure

7PREPARATIONRead the following note and install this unit at a location where you want to use it. Note on installationInstall this unit while taking