Yamaha YHT-F1500 User Manual

Browse online or download User Manual for Skill games Yamaha YHT-F1500. Quick-Connect Guide

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Quick-Connect Guide
YHT-F1500
Home Theater in a Box


 
1 2
3
6
5
7
8
Connect Front Main Speaker
Wire For illustration purposes, stand,
which is now attached to speaker, is not
shown in diagram above. Locate screw-
type input terminals at the rear of each of
the speakers. Connect the speaker wire as
shown. The positive (+) side of the wire
with the white stripe attaches to the red
terminal. The negative (-) side attaches to
the black terminal. (Please see your NS-
AP9500 Owner’s Manual for more detailed
instructions on speaker wire connections.)
Place assembled main speakers in desired
location to the left and right of the viewing/
audio source. (See Step 2, Room Layout.)
4
Attach Main
Speakers Lay stands
down. Line up holes
so that oval opening
is near speaker wire
connections on speaker.
Attach main speakers
using long screws as
shown. Attach cable
protection seal to
base as shown in inset.
Attach Bases to Stands Apply the non-skid pads as shown in the
inset. Identify both speaker stands and both bases and attach using
short screws as shown.
Attach Finishing Brackets on top of two speaker stands.
Inspect Contents After unpacking, inspect the contents to conrm you have the above items: two main
speakers, three surround speakers, one front center speaker, bulk speaker wire, two bases, two speaker
stands, two nishing brackets, RCA cable, one bag each of long screws (8) and short screws (4), front
center speaker bracket and screw, powered subwoofer, audio/video RCA cable, RX-SL100 A/V Receiver with
remote control, DV-SL100 DVD Player with remote control, non-skid pads for base, non-skid pads for stands,
and cable protection seal for base. Also included, but not shown, are 6 pairs of colored cable tags, AM and FM
antennas and three related Owner’s Manuals.
Thread Speaker
Wires Cut
speaker wire to
appropriate lengths
for all speaker
connections and
set aside. Place
each long stand
upright on its base.
Thread main speaker
wire through
oval opening on
stand and pull
through opening
on underside of
base. Pull wire all
the way through
leaving extra length
near oval opening
as shown. Attach
color cable tags to
all speaker wires as
shown in Step 10.
Apply non-skid pads
on stands.
9
Attach Bracket and Speaker Wire Attach bracket to center
speaker using supplied screw as shown. Attach speaker wire as shown
in Step 6.
Main Speaker Assembly
Your System
Room Layout
Rear
Speakers
Mount Surround Speakers and Surround Back Speaker Fasten mounting screws into a
rm wall or wall support as shown. Hang the keyholes on the back of the each of the speakers on
the protruding screws. Attach speaker wire as shown in Step 6.
NOTE Banana plug connectors (not
included) can be used to connect speaker
wire to speaker terminals. Please see your
Owner’s Manual for directions.
Front Center Speaker Assembly
Speaker Placement After assembly of the speakers place them so they appear in the approximate positions as
shown in the diagram above.
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to assemble and connect the speakers rst. Then connect
your DVD Player and other components . Refer to your Owner’s Manuals as well as those that came with your
other components for complete instructions and precautions. Be sure to turn off all power while making
connections. You will need the following which are not included in the package: Phillips screwdriver, wire
cutter/stripper, brackets, toggle bolts, molly anchor screws or sheet metal screws.
For mounting
screws, use
minimum
1
3
/
4
"
tapping
screw (not
included).
Leave
1
/
4
"
space
between screw
head and wall.
1
3
/
4
"
16
7
/
32
"
16
7
/
32
"
TYPICAL
WARNING If you are unsure of how to securely and safely fasten speakers to a wall, please contact a
reliable source about the best type of hardware for your particular wall’s construction. Secure installation
is the purchaser’s responsibility. See Owner’s Manual for additional instructions and precautions.
Speaker
Wire
use this size screw
use this size screw
(8)
(2)
(4)
Page view 0
1 2

Summary of Contents

Page 1 - Quick-Connect Guide

Quick-Connect GuideYHT-F1500Home Theater in a Box 1 236578Connect Front Main Speaker Wire For illustration purposes, stand, which is

Page 2 - Connection

17101112131415Connect Speakers Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal.At

Comments to this Manuals

No comments